S8986 Datasheet, PDF (1/7 Pages) Hamamatsu Corporation – CCD area image sensor Front-illuminated FFT-CCDs for X-ray imaging

IMAGE SENSOR
CCD area image sensor
S8986, S10128
Front-illuminated FFT-CCDs for X-ray imaging
S8986 is an FFT-CCD image sensor ideal for intra-oral X-ray imaging in dental diagnosis. S8986 has about 2 mega (1700 × 1200) pixels each of
which is 20 × 20 µm. S8986 delivers low dark current when operated in MPP (Multi Pinned-Phase) mode.
S10128 is an easy-to-use X-ray imaging module using S8986, with added functions such as a cable assembly and X-ray trigger circuit. S10128 is
pin compatible with S10127 (number of pixels is increased). S10128 is low cost type for S8985-02 and adapted both AC and DC X-ray sources.
Features
l Sensor has X-ray monitoring photodiode
l Compactness
5.1 mm thickness excluding I/O connector part
l High dynamic range: 12 bit
l Long-term stability
For use under 100,000 shots
(60 kVp, 30 mR X-ray irradiation)
l Resolution: 10 Lp/mm
l 1700 (H) × 1200 (V) pixel format
l Pixel size: 20 × 20 µm
l Coupled with GOS for X-ray imaging
l 100 % fill factor
l Low dark signal
l Low readout noise
l MPP operation
l AC/DC X-ray source adapted
Applications
l General X-ray imaging
l Non-destructive inspection
l Intra-oral X-ray imaging in dental diagnosis
s Selection guide
Type No.
S8986
S10128
s General ratings
Parameter
CCD structure
Fill factor
Number of active pixels
Pixel size
Active area
Vertical clock phase
Horizontal clock phase
Output circuit
Dimensional outline
Reliability
Window
Other
Cooling
Non-cooled
Number of
total pixels
1708 × 1202
Number of
active pixels
1700 × 1200
Active area
[mm (H) × mm (V)]
34 × 24
S8986
S10128
Full frame transfer
100 %
1700 (H) × 1200 (V)
20 (H) × 20 (V) µm
34 (H) × 24 (V) mm
2 phase
2 phase
Emitter follower without load resistance
39.5 (H) × 27.5 (V) mm
42.6 (H) × 30.6 (V) mm
100,000 shots at 60 kVp, 30 m Roentgen
GOS film
MPP mode (low dark current operation), module (S10128)
1