YB15SKW01-12-CB Datasheet, PDF (9/9 Pages) GREATECS – Short Body Pushbuttons

Illuminated Switches
Short Body Pushbuttons
YB Series
ASSEMBLY INSTRUCTIONS
Cap Assembly
Grip Slot
Projections
LED Polarity & Orientation in Lamp Socket
Spot
Plunger
Pinhole
Attention
Electrostatic
Sensitive Devices
Switch
Body
Positive
Lamp Socket
Negative
Lamp Socket
Part Number
Top View of Switch
(+)
(-)
Spot Illuminated Cap
with Built-in LED
Flat
(-) ⁽⁺⁾
Flat
(+) _(-)
Flat
(-) ⁽⁺⁾
LED
AT628
AT634
LEDs
AT625G
AT631B AT632F
LED
AT621
The following installation tools are available: AT106 Socket Wrench for bushing mounting (Overtightening the mounting nut AT092
may damage the switch housing.); AT109 Cap Extractor; AT111 Lamping Tool.
Further details and dimensions are shown in the Accessories and Hardware section.
LEGENDS
General information and basic specifications are presented here for customers who want to do their own legends.
ON
Recommended Methods: Laser Etch on clear lens, Screen Print or Pad Print on lens.
Epoxy based ink is recommended.
Shaded Areas Are Printable Areas for Lens
(13.48) (15.0)
.531 .591
ON
Lens
Film
Insert
Filter
Seal
Cap
Base
(13.48) Sq
.531
(15.0) Sq
.591
(0.76) Typ
.030
(13.48) Dia
.531
(15.0) Dia
.591
(0.76) Typ
.030
(0.76) Typ
.030
(19.48)
.767
(21.0)
.827
Shaded Areas Are Printable Areas for Film Insert
(0.76) Typ
.030
(9.88) (11.4
.389 .449
(10.68) (12.2)
.420 .480
(10.68) Sq
.420
(12.2) Sq
.480
(0.76) Typ
.030
(0.76) Typ
.030
(10.68)
.420
(12.2)
.480
(0.76) Typ
.030
(0.76) Typ
.030
(16.68)
.657
(18.2)
.717
(0.76) Typ
.030
Film Material and Thickness:
Clear Polyester, 4 mil max.
Recommended Print Method:
Screen Print; Epoxy based ink is recommended.
Additional Methods
Additional methods for legends are engraving the lens and laser printing on film inserts. Maximum depth for engraving
is .012” (0.3 mm) on the cap lens. Enamel paint is recommended to fill the engraved area.
[e-mail]
www.greatecs.com 9