|
SES5VSC70-6U Datasheet, PDF (1/6 Pages) GOOD-ARK Electronics – Low Capacitance ESD Protector Array | |||
|
Low Capacitance ESD Protector Array
SES5VSC70-6U
SES Series
ROHS
Description
 SES5VSC70-6U are surge rated diode arrays designed to protect high speed data interfaces. This device has been
specifically designed to protect sensitive components which are connected to data and transmission lines from
overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast
transients).
 The unique design incorporates surge rated, low capacitance
steering diodes and a TVS diode in a single package. During
transient conditions, the steering diodes direct the transient to
either the positive side of the power supply line or to ground. The
internal TVS diode prevents over-voltage on the power line,
protecting any downstream components.
 The low capacitance array configuration allows the user to
protect four high-speed data or transmission lines. The low
inductance construction minimizes voltage overshoot during high
current surges. This device is optimized for ESD protection of
portable electronics. They may be used to meet the ESD
immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±
8kV contact discharge).
Feature
 Array of surge rated diodes with internal TVS Diode
 SC-70-6 Package
 Protects up to four I/O lines & power line
 Low capacitance (<2pF) for high-speed interfaces
 No insertion loss to 2.0GHz
 Low leakage current and clamping voltage
 Low operating voltage: 5.0V
 Solid-state silicon-avalanche technology
 Transient protection for data lines to IEC 61000-4-2(ESD) ±15KV(air),
±8KV(contact); IEC 61000-4-4 (EFT) 40A (5/50ns)
Applications
 USB 2.0
 USB OTG
 Monitors and Flat Panel Displays
 Displays Digital Visual Interface (DVI)
 High-Definition Multimedia Interface (HDMI)
 Gigabit Ethernet
 SIM Ports
 IEEE 1394 Firewire Ports
ESD Protector
1
www.goodark.com
|
▷ |