152-005-5-12 Datasheet, PDF (7/41 Pages) Glenair, Inc. – RADIO CONNECTORS AND CABLES

HiPer 55116
Audio Plug with wire strain relief,
crimp-removable contacts
157-009
TACTICAL
INTERCONNECT
SOLUTIONS
AUDIO PLUG, FIELD-SERVICEABLE WITH WIRE STRAIN RELIEF AND CRIMP-REMOVABLE CONTACTS
MATES WITH 152-003 AND 152-004, 151-003 AND 151-004, AND STANDARD MIL-DTL-55116 RECEPTACLES
How To Order
Sample Part Number
157-009
Series
Connector Configuration
(See Table I)
Size
(cable accommodation)
HiPer 55116 Audio plug with wire strain relief
-1 = 5 pin, crimp-removable contacts
-2 = 6 pin, crimp-removable contacts
-1 = .165 ± .010
-2 = .228 ± .010
-3 = .250 ± .010
-4 = .290 ± .010
-5 = .320 ± .010
Crimp-removable
Pin contact
Contact
retainer disc
-1 -3
48°
1.018
(2.410)
.820 ^.790
(.250)
(1.200)
Ø
.836
.826
Ground/EMI spring
(360° coverage)
Crimp removable
Pin contact
.750 Flats
Contact retainer disc
.625 Hex
Table I: Connector Configuration
5 Contacts
157-009-1
157-009-2
6 Contacts
M55116/1 type
(U-229) Plug,
5 crimp-removable
contacts
M55116/2 type
(U-229) Plug,
6 crimp-removable
contacts
MATERIALS AND FINISHES
Shells and backshells: Stainless steel/PTFE-nickel plated (matte finish)
Inserts: Diallylphthalate resin type SDG-F
Seals: Ethylene propylene rubber
Other metals: Aluminum alloy 6061 T6/hard anodized (dark gray)
Strain Relief Spring: Steel corrosion resistant wire/chemical blackening
Contacts: Copper alloy/gold plate
NOTES
Plugs are identified with Glenair’s name, part number and date code.
Meets interface configurations and IAW specifications of MIL-DTL-55116 Type C, and exceeds
the following:
Shell-to-shell conductivity: 2.5 milliohms max.
Cable shield-to-shell conductivity: 2.5 milliohms max.
Contact resistance (mated): 15 milliohms max. average; 20 milliohms max.
Pressure sealing (mated & un-mated): IP67 (1 meter of standing water for 1 hour)
Salt atmosphere: 1,000 hours (MIL-STD-202, Method 101E)
Cable pull-out force (unmated): 100 lbf. (Cable shield strength dependent)
Crimp-removable pin contacts and contact retainer disc are supplied loose. Contact Glenair
for the crimp tool and locator.
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • QPL and HiPer MIL-DTL-55116
5
Dimensions are subject to change without notice.