152-005-5-12 Datasheet, PDF (35/41 Pages) Glenair, Inc. – RADIO CONNECTORS AND CABLES

BAND-MASTER ATS^®
TACTICAL
EMI/RFI Shield Termination
INTERCONNECT
Nano banding tool and bands for
SOLUTIONS
Series 151 and 152 connectors with banding platforms
THE 601-108 BAND-MASTER ATS® NANO TOOL WITH COUNTER FOR NANO BANDS
Weighs 1.15 lbs., and is designed for nano flat .075" width clamping bands in a tension range
from 20 to 50 lbs. Calibrate at 50 lbs. ± 3 lbs. for most shield terminations. Tool and band
should never be lubricated.
Bands
Short Nano
Medium Nano
Long Nano
Band-Master ATS® Nano Band Selection
Length
Part Number
Fits Diameter
in.
mm.
Flat
Pre-Coiled
in.
mm.
6.0 152.4
601-500
601-501
.60
15.2
9.0 228.6
601-504
601-505
.94
23.9
14.0 355.6
601-508
601-509
1.8
45.7
Color-coded tool handle:
= Nano; Green
Cable Pull Strength for Band-Master ATS® Nano Bands
Name
Material Type
Band Width
In. mm.
Band Thick-
ness
In. mm.
Tool Setting
Nano
300 SS
0.075 1.91 .009 .23
50 ­±3 lbs
* Nano Bands are work hardened to achieve higher cable pull force
Cable Pull
Strength
50 lbs*
Short Flat 601-500
Short Precoiled 601-501
Nano Bands are precision constructed of work hardened,
300 Series SST passivate IAW AMS 2700. Short nano bands
are 6.00 inches (152.4) in length and designed for use with
the 601-108 Band-Master™ ATS hand banding tool or the
601-118 pneumatic banding tool. Bands should always be
double wrapped and will accommodate diameters up to
approximately .60 inches (15.2).
Medium Flat 601-504
Medium Precoiled 601-505
Nano Bands are precision constructed of work
hardened, 300 Series SST passivate IAW AMS 2700. Medium
nano bands are 9.00 inches (228.6) in length and designed
for use with the 601-108 Band-Master™ ATS hand banding
tool or the 601-118 pneumatic banding tool. Bands
should always be double wrapped and will accommodate
diameters up to approximately .94 inches (23.9).
.124 (3.1) Ref.
Tail Length Indicator Mark
.075 (1.9) Ref.
6.0 ± .030
(152.4 ± 0.8)
.056 (2.29) Ref.
.038 (0.9) Ref.
.009 (0.2) Ref.
.124 (3.1) Ref.
Tail Length Indicator Mark
.075 (1.9) Ref.
9.0 ± .030
(228.6 ± 0.8)
.056 (2.29) Ref.
.038 (0.9) Ref.
.009 (0.2) Ref.
Long Flat 601-508
Long Precoiled 601-509
Nano Bands are precision constructed of work hardened,
300 Series SST passivate IAW AMS 2700. Long nano bands
are 14.25 inches (361.95) in length and designed for use
with the 601-108 Band-Master™ ATS hand banding tool or
the 601-118 pneumatic banding tool. Bands should always
be double wrapped and will accommodate diameters up to
approximately 1.8 inches (45.7).
.124 (3.1) Ref.
Tail Length Indicator Mark
.075 (1.9) Ref.
14.00 ± .030
(361.95 ± 0.8)
.056 (2.29) Ref.
.038 (0.9) Ref.
.009 (0.2) Ref.
© 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 • QPL and HiPer MIL-DTL-55116
33
Dimensions are subject to change without notice.