240-790-072 Datasheet, PDF (5/6 Pages) Glenair, Inc. – Rear Panel Mount with Solder Cup Termination

240-790-072
Series 79 Filtered Plug
Rear Panel Mount with Solder Cup Termination
240-790-072S SHELL SIZE H AND L DIMENSIONS
F Max.
G Basic
H Basic
J Max.
.349 (8.86)
Max.
.158 (4.01)
4-40 UNC-2B
X .150 (3.81) Min
2 Places
Jackpost Shown
For Reference
See Table III
.150 (3.81) Min
2X
.093 ± .005
(2.36 ± 0.13)
.385 (9.78)
Max.
.872 (22.15)
Max.
#23ga For Center Rows
.270 ± .060 (6.86 ± 1.52)
#23ga For All Layouts
.200 ± .060 (5.08 ± 1.52)
#16ga And #12ga In Combo Layouts
.250 ± .060 (6.35 ± 1.52)
#16ga And #12ga In Power Layouts
.340 ± .060 (8.64 ± 1.52)
G
.600 (15.24)
Max.
4-40 UNC-2B
X .150 (3.81) Min
2 Places
K Max.
H Basic
Shell Size H & L
.265 (6.73)
Max.
Shell
Size
H
L
790-072S Size H & L Dimensions
F Max.
G Basic
H Basic
J Max.
K Max.
In. mm. In. mm. In. mm. In. mm. In. mm.
2.500 63.50 2.236 56.79 1.800 45.72 1.385 35.18 2.045 51.94
2.736 69.49 2.472 62.79 2.036 51.71 1.623 41.22 2.281 57.94
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-60
E-Mail: [e-mail]