240-790-072 Datasheet, PDF (3/6 Pages) Glenair, Inc. – Rear Panel Mount with Solder Cup Termination

240-790-072
Series 79 Filtered Plug
Rear Panel Mount with Solder Cup Termination
240-790-072S SHELL SIZE A, B, C, D, E, F, J AND K DIMENSIONS
A Max.
B Basic
C Basic
D Max.
.233 (5.92)
Max.
.150 (3.81) Min.
2X
2-56 UNC-2B
X .150 (3.81) Min
2 Places
.158 (4.01)
.093 ± .005
(2.36 ± 0.13)
Jackpost Shown
For Reference
See Table III
.335 (8.51)
Max.
.872 (22.15)
Max.
#23ga For All Layouts
.200 ± .060 (5.08 ± 1.52)
#16ga In Combo Layouts
.250 ± .060 (6.35 ± 1.52)
#16ga In Power Layouts
.340 ± .060 (8.64 ± 1.52)
G
E Max.
C Basic
.485 (12.32)
Max.
.215 (5.46)
Max.
2-56 UNC-2B
X .150 (3.81) Min
2 Places
Shell Sizes A,B,C,D,E,F,J,K
Shell
Size
A
B
C
D
E
F
J
K
790-072S Dimensions for Size A-F, J and K
A Max.
B Basic
C Basic
D Max.
In. mm. In. mm. In. mm. In. mm.
1.211 30.76 .925 23.50 .565 14.35 .335 8.51
1.361 34.57 1.075 27.31 .715 18.16 .485 12.32
1.511 38.38 1.225 31.12 .865 21.97 .635 16.13
1.611 40.92 1.325 33.66 .965 24.51 .735 18.67
1.761 44.73 1.475 37.47 1.115 28.32 .885 22.48
1.911 48.54 1.625 41.28 1.265 32.13 1.035 26.29
2.261 57.43 1.975 50.17 1.615 41.02 1.390 35.31
2.661 67.59 2.375 60.33 2.015 51.18 1.795 45.59
E Max.
In. mm.
.760 19.30
.910 23.11
1.060 26.92
1.160 29.46
1.310 33.27
1.460 37.08
1.810 45.97
2.210 56.13
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
G-58
E-Mail: [e-mail]