712AS419XM Datasheet, PDF (2/2 Pages) Glenair, Inc. – Composite Conduit-to-Connector Adapter

712-419
Composite Conduit-to-Connector Adapter
Straight, 45° and 90°
For Glenair Series 74 Helical Convoluted Tubing
TABLE I: CONNECTOR SHELL SIZE ORDER NUMBER
Shell Size
E
F
G
H
Tubing
A,F & H
08, 09
G & U +.06 (1.5)
–
.72 (18.3)
+.09 (2.3)
.89 (22.6)
+.06 (1.5)
+.09 (2.3) Size Max.
.69 (17.5) 1.11 (28.2) 09
A
03, 10, 11 08
.75 (19.1)
.95 (24.1)
.75 (19.1) 1.16 (29.5) 12
12, 13 10, 11
.75 (19.1) 1.02 (25.9)
.81 (20.6) 1.22 (31.0) 16
14, 15 12, 13
.76 (19.3) 1.05 (26.7)
.88 (22.4) 1.29 (32.8) 20
16, 17 14, 15
.78 (19.8) 1.07 (27.2)
.94 (23.9) 1.35 (34.3) 24
18, 19 16, 17
.79 (20.1) 1.08 (27.4)
.97 (24.6) 1.38 (35.1) 28
20, 21 18, 19
.82 (20.8) 1.11 (28.2) 1.06 (26.9) 1.47 (37.3) 32
22, 23
20
24, 25, 61 22, 23
.86 (21.8) 1.15 (29.2) 1.13 (28.7) 1.54 (39.1) 32
.89 (22.6) 1.18 (30.0) 1.19 (30.2) 1.73 (43.9) 40
B
28
24, 25
.92 (23.4) 1.21 (30.7) 1.34 (34.0) 1.82 (46.2) 40
Tubing
Size
06
09
10
12
14
16
20
24
28
32
40
48
TABLE II: TUBING SIZE
Conduit
I.D.
.188 (4.8)
.281 (7.1)
.312 (7.9)
.375 (9.5)
.437 (11.1)
.500 (12.7)
.625 (15.9)
.750 (19.1)
.875 (22.2)
1.000 (25.4)
1.250 (31.8)
1.500 (38.1)
J Dia
Max
.54 (13.7)
.63 (16.0)
.69 (17.5)
.73 (18.5)
.80 (20.3)
.87 (22.1)
1.00 (25.4)
1.18 (30.0)
1.32 (33.5)
1.47 (37.3)
1.76 (44.7)
2.13 (54.1)
K Dia. Entry
± .03 (.76)
.12 (3.0)
.22 (5.6)
.24 (6.1)
.29 (7.4)
.34 (8.6)
.40 (10.2)
.52 (13.2)
.65 (16.5)
.78 (19.8)
.90 (22.9)
1.08 (27.4)
1.32 (33.5)
Symbol
TABLE III
Finish Description
C
XB No Plating - Black Color (Non-Conductive Finish)
XM 2000 Hour Corrosion Resistant Electroless Nickel
XMT
2000 Hour Corrosion Resistant Ni-PTFE, Nickel-
Fluorocarbon Polymer. 1000 Hour Grey^TM
D
XO No Plating - Brown Color (Non-Conductive Finish)
XW
2000 Hour Corrosion Resistant Cadmium/Olive
Drab over Electroless Nickel
E
APPLICATION NOTES
1. Metric dimensions (mm) are in parentheses and are for reference only.
2. Convoluted tubing size, tubing to be ordered separately (see Series 74 Catalog, Type A Tubing Section, Standard Pitch). Dash 1
configuration accommodates Type B or D Tubing. For PTFE maximum lengths - consult factory.
F
3. Different adapters are necessary to terminate PEEK tubing. Nominal I.D. reduced by approximately .060 (use Suffix P) in P/N
development. For permanent termination use 3M Scotch Weld after installing tubing/shielding, see Detail A.
© 2009 Glenair, Inc.
CAGE Code 06324
G
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
C-25
E-Mail: [e-mail]