712AS419XM Datasheet, PDF (1/2 Pages) Glenair, Inc. – Composite Conduit-to-Connector Adapter

712-419
Composite Conduit-to-Connector Adapter
Straight, 45° and 90°
For Glenair Series 74 Helical Convoluted Tubing
A
B
C
D
Product Series
712 - Conduit Adapter
Angle and Profile
S - Straight
T - 45° Elbow
W - 90° Elbow
Finish Symbol
(See Table III)
Tubing Size
(See Table II)
To Accomodate EMI or
Dacron Over Braid
(Omit if not required)
712 F T 419 XM 19 12 K - 1 - A
Connector Designator
A, F, H and U
Basic Part
Number
CONNECTOR DESIGNATOR:
A - MIL-DTL-5015 / -26482 / -83723
F - MIL-DTL-38999 Series I, II
H - MIL-DTL-38999 Series III and IV
U - DG123 and DG123A
SELF-LOCKING
ROTATABLE
COUPLING
LOW PROFILE
A Thread Typ.
C
Anti-
Decoupling
Device
Connector
Shell Size
(See Table I)
Tubing Option
K - PEEK
(Omit for PFA,
ETFE, FEP or
PTFE; see note 2)
Optional
Configuration
(See Detail A)
1.250
(31.8)
See optional configuration and Detail A
Tubing shown for reference only
(See Note 2)
Tubing I.D. _{J Typ}
(see Note 3)
Sym S – Straight _{Knurl or Flute Style Manufacturer's Option, Typ.}
G
E
F
E
Sym W
90°
Dash 1 configuration
EMI or Dacron over Braid
(See P/N Development)
F
H
K Diameter
Entry TYP
Sym T
45°
Raised configuration
(Mfr's option)
G
© 2009 Glenair, Inc.
Land area to
accommodate
DETAIL A
Adhesive
Optional Adhesive
Land Configuration
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
C-24
E-Mail: [e-mail]