463GH003M11 Datasheet, PDF (2/2 Pages) Glenair, Inc. – EMI/RFI Environmental G-Spring Backshell with Strain Relief

463-003
EMI/RFI Environmental G-Spring Backshell
with Strain Relief
Rotatable Coupling - Standard Profile
See inside back cover
fold-out or pages 13 and
14 for Tables I and II.
Shell
Size
11
13
15
17
19
23
25
29
33
TABLE III: ELBOW DIMENSIONS
E
F
G
Max
Max
Max
1.240 (31.5) 1.630 (41.4) 1.380 (35.1)
1.260 (32.0) 1.650 (41.9) 1.440 (36.6)
1.290 (32.8) 1.680 (42.7) 1.500 (38.1)
1.310 (33.3) 1.700 (43.2) 1.570 (39.9)
1.340 (34.0) 1.730 (43.9) 1.630 (41.4)
1.380 (35.1) 1.770 (45.0) 1.730 (43.9)
1.410 (35.8) 1.800 (45.7) 1.800 (45.7)
1.580 (40.1) 1.970 (50.0) 2.040 (51.8)
1.620 (41.1) 2.010 (51.1) 2.130 (54.1)
H
Max
1.770 (45.0)
1.830 (46.5)
1.900 (48.3)
1.960 (49.8)
2.040 (51.8)
2.120 (53.3)
2.190 (53.8)
2.430 (61.7)
2.520 (64.0)
TABLE IV: CABLE ENTRY
Dash
M
N
Cable Range
No.
Max
Max
Min
Max
01 .843 (21.4) .625 (15.9) .125 (3.2) .250 (6.4)
02 .968 (24.6) .750 (19.1) .156 (4.0) ^{.375 (9.5)}
03 1.046 (26.6) .875 (22.2) .250 (6.4) .438 (11.1)
04 1.156 (29.4) 1.000 (25.4) .280 (7.1) ^{.500 (12.7)}
05 1.218 (30.9) 1.125 (28.6) .375 (9.5) ^{.625 (15.9)}
06 1.343 (34.1) 1.250 (31.8) .500 (12.7) .750 (19.1)
07 1.468 (37.3) 1.375 (34.9) .625 (15.9) ^{.875 (22.2)}
08 1.593 (40.5) 1.500 (38.1) .750 (19.1) 1.000 (25.4)
09 1.718 (43.6) 1.625 (41.3) .875 (22.2) ^{1.125 (28.6)}
10 1.843 (46.8) 1.750 (44.5) 1.000 (25.4) ^{1.250 (31.8)}
11* 2.187 (55.5) 1.875 (47.6) 1.125 (28.6) 1.375 (34.9)
12* 2.312 (58.7) 2.000 (50.8) 1.250 (31.8) ^{1.500 (38.1)}
13* 2.437 (61.9) 2.125 (54.0) 1.375 (34.9) 1.625 (41.3)
14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) ^{1.750 (44.5)}
* Consult factory for availability
1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells
(see page 463-8).
2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied.
Dimensions E, F, G and H will not apply. Please consult factory.
3. Metric dimensions (mm) are indicated in parentheses.
4. Cable range is defined as the accommodations range for the wire bundle or cable.
Dimensions shown are not intended for inspection criteria.
5. Consult factory for shorter lengths on straight backshells.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 463 - Page 7
E-Mail: [e-mail]