463GH003M11 Datasheet, PDF (1/2 Pages) Glenair, Inc. – EMI/RFI Environmental G-Spring Backshell with Strain Relief

463-003
EMI/RFI Environmental G-Spring Backshell
with Strain Relief
Rotatable Coupling - Standard Profile
CONNECTOR
DESIGNATOR
G
ROTATABLE
COUPLING
Length ± .060 (1.52)
Min. Order Length 2.0 Inch
(See Note 5)
463 G S 003 M 17 10 F 6
Product Series
Connector Designator
Angle and Profile
H = 45
J = 90
S = Straight
Length: S only (1/2 inch incre-
ments: e.g. 6 = 3 inches)
Strain Relief Style (F, G)
Cable Entry (Table IV)
Shell Size (Table I)
Basic Part No.
Finish (Table II)
A Thread
(Table I)
Length *
1.22
(31.0)
Max
C Typ.
(Table I)
Cable M
Range (Table IV)
STYLE 2
(STRAIGHT
See Note 1)
Length ± .060 (1.52)
1.25 (31.8)
Max
* Length ± .060 (1.52)
Minimum Order Length 1.5 Inch
(See Note 5)
E
(Table III)
F (Table III)
Shown with Style F
Strain Relief
G
(Table III)
STYLE 2
(45° & 90°
See Note 1)
469-001-XX Shield Support Ring
(order separately) is recommended
for use in all G-Spring backshells
(see page 463-8)
Shown with Style F
Strain Relief
Add “-445” to Specify Glenair’s Non-Detent,
("NESTOR") Spring-Loaded, Self-Locking Coupling.
See Page 41 for Details.
H (Table III)
1.000 (25.4)
Max
N
(Table IV)
Shown with
Style G
Strain Relief
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 463 - Page 6
E-Mail: [e-mail]