400AA001M08 Datasheet, PDF (2/2 Pages) Glenair, Inc. – TAG Ring Backshell with Strain Relief

400-001
TAG^® Ring Backshell
with Strain Relief
Rotatable Coupling - Low Profile
See inside back cover
fold-out or pages 13 and
14 for Tables I and II.
Shell Size
Conn. Desig.
A-F-L-S H
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
28
32
36
TABLE III: ELBOW DIMENSIONS
E
Max
.457 (11.6)
.520 (13.2)
.582 (14.8)
.645 (16.4)
.738 (18.7)
.926 (23.5)
.926 (23.5)
1.020 (25.9)
1.020 (25.9)
1.145 (29.1)
1.207 (30.7)
1.238 (31.4)
F
Max
1.660 (42.2)
1.720 (43.7)
1.780 (45.2)
1.870 (47.5)
1.980 (50.3)
2.170 (55.1)
2.170 (55.1)
2.320 (58.9)
2.320 (58.9)
2.370 (60.2)
2.470 (62.7)
2.560 (65.0)
G
Max
.500 (12.7)
.595 (15.1)
.610 (15.5)
.700 (17.8)
.885 (22.5)
.975 (24.8)
.975 (24.8)
1.125 (28.6)
1.125 (28.6)
1.225 (31.1)
1.575 (40.0)
1.775 (45.1)
H
Max
1.670 (42.4)
1.790 (45.5)
1.810 (46.0)
1.880 (47.8)
1.970 (50.0)
2.140 (54.4)
2.140 (54.4)
2.250 (57.2)
2.250 (57.2)
2.420 (61.5)
2.670 (67.8)
2.670 (67.8)
TABLE IV: CABLE ENTRY
Dash
K
Cable Entry
No.
Max
Max
02 .545 (13.8) .250 (6.4)
03 .670 (17.0) .375 (9.5)
04 .795 (20.2) .500 (12.7)
05 .920 (23.4)
06 1.045 (26.5)
.625 (15.9)
.750 (19.1)
07 1.170 (29.7) .875 (22.2)
08 1.295 (32.9) 1.000 (25.4)
09 1.420 (36.1) 1.125 (28.6)
10 1.670 (42.4) 1.250 (31.8)
Dash
No.
02
03
04
05
06
07
08
09
10
TABLE V: CABLE ENTRY
L
Cable Range
Max
Min
Max
.968 (24.6) .125 (3.2) .250 (6.4)
1.046 (26.6) .250 (6.4) .375 (9.5)
1.156 (29.4) .250 (6.4) .500 (12.7)
1.218 (30.9) .375 (9.5) .625 (15.9)
1.343 (34.1) .500 (12.7) .750 (19.1)
1.468 (37.3) .625 (15.9) .875 (22.2)
1.593 (40.5) .625 (15.9) 1.000 (25.4)
1.718 (43.6) .750 (19.1) 1.125 (28.6)
1.843 (46.8) .875 (22.2) 1.250 (31.8)
1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied.
Dimensions E, F, G and H will not apply. Please consult factory.
2. Metric dimensions (mm) are indicated in parentheses.
3. Cable range is defined as the accommodations range for the wire bundle or cable.
Dimensions shown are not intended for inspection criteria.
4. Consult factory for shorter lengths on straight backshells.
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 40 - Page 5
E-Mail: [e-mail]