400AA001M08 Datasheet, PDF (1/2 Pages) Glenair, Inc. – TAG Ring Backshell with Strain Relief

400-001
TAG^® Ring Backshell
with Strain Relief
Rotatable Coupling - Low Profile
CONNECTOR
DESIGNATORS
A-F-H-L-S
ROTATABLE
COUPLING
400 F S 001 M 16 06 L 6
Product Series
Connector
Designator
Angle and Profile
A = 90
B = 45
S = Straight
Length: S only
(1/2 inch increments:
e.g. 6 = 3 inches)
Strain Relief Style (F, G, L)
Cable Entry (Table IV, V)
Shell Size (Table I)
Basic Part No.
Length ± .060 (1.52)
Minimum Order Length 1.5 Inch
(See Note 4)
A Thread
(Table I)
C Typ.
(Table I)
Finish (Table II)
Length *
Ground
Spring
* Length
± .060 (1.52)
Minimum Order
Length 1.0 Inch
(See Note 4)
Shown with Style G Nut
STYLE 2
(STRAIGHT
See Note 1)
.88 (22.4)
Max
E
(Table III)
Add “-445” to Specify Glenair’s Non-Detent,
("NESTOR") Spring-Loaded, Self-Locking Coupling.
See Page 41 for Details.
G
(Table III)
F (Table III)
STYLE 2
(45° & 90°
See Note 1)
Shown with Style L
Strain Relief
STYLE F
Light Duty
(Table V)
.416 (10.5)
Approx.
STYLE G
Light Duty
(Table IV)
.072 (1.8)
Approx.
Cable _L
Range
Cable
Entry
K
H (Table III)
STYLE L
Light Duty
(Table V)
.850 (21.6)
Approx.
Cable
Range
L
© 2005 Glenair, Inc.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
Series 40 - Page 4
E-Mail: [e-mail]