050_340 Datasheet, PDF (2/14 Pages) Glenair, Inc. – PRINTED CIRCUIT BOARD (PCB) MOUNT

050-340 Product Brief
PCB Mount Bi-Directional 1310/1550 Single Fiber
Transceiver, 125 Mbps – 1.25 Gbps, SMF, 3.3V
PCB Mount Bi-Directional Single Fiber Transceiver, 125 Mbps-1.25 Gbps
Glenair 050-340, is a ruggedized harsh environment PCB mount full duplex Single
Fiber Transceiver with electrical and optical functionality equivalent to SFP
transceivers but with mechanical design that is suited to the harsh temperature and
vibration environments found in Military, Aerospace, Railway, Oil and Gas, and
Industrial applications. The PCB mount optical transceiver supports Digital
Monitoring Interface (DMI) features in accordance with SFF 8472. The transceiver
consists of a Diplexer Bidirectional optical subassembly (BOSA) capable of full duplex
data transmission over a single fiber optic cable. The BOSA consists of a transmitter
optical subassembly (TOSA) and a receiver optical subassembly (ROSA) and a wave
division multiplexer filter (WDM) to isolate the ROSA from the TOSA. The
transceiver interfaces to an optical fiber through a GC connector. The TOSA contains
an FP (Fabry-Perot) Laser light source and laser driver circuit which converts digital
DC balanced encoded CML signals into digitally modulated light. The ROSA contains
a PIN/TIA and Limiting amplifier and converts digitally modulated light signals to digital
CML signals.
KEY FEATURES/BENEFITS
 SFP Compatible Electrical I/O signal levels
 1310nm or 1550nm FP lasers to support up to
1.25 Gbps
 4km SMF links @ 1.25Gbps
 10km SMF links @ 125 Mbps
 PIN PD/TIA to support high sensitivity up to 1.25
Gbps
 Industry standard CML input and outputs that
make for simple integration on customer host PCB
 Glenair Rugged GC Optical connector with
positive retention clips.
 Transceiver is securely mounted with screws to
PCB to ensure excellent shock and vibration
performance
 High-Speed Electrical plug-in connector eliminates
the need for soldering & enables ease of servicing
HOW TO ORDER
 -40°C to +85°C Operating Temperature Range
 Glenair fiber jumpers connect from transceiver to
any Glenair Mil/Aero Fiber Optic Connector Style
 Evaluation fixtures available
 Optional Digital Diagnostic and Monitoring (DMI)
based on SFF-8472, enables monitoring of:
o Transmitted optical power
o Laser bias current,
o Temperature
o Supply voltage
o Received Optical Power
APPLICATIONS
 Harsh Environment such as: Airborne, Tactical,
Railway, Industrial, Oil and Gas and Shipboard
applications
o Fast Ethernet, Gigabit Ethernet
Fibrechannel
Table 1 Part Number Options
Part Number
Description
050-340-T13R15-1D
125Mbps-1.25Gbps,1310 nm TX, 1550 nm RX
050-340-T15R13-1D
125Mbps-1.25Gbps,1550 nm TX, 1310 nm RX
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 4
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 2 of 14
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]