050_340 Datasheet, PDF (10/14 Pages) Glenair, Inc. – PRINTED CIRCUIT BOARD (PCB) MOUNT

050-340 Product Brief
PCB Mount Bi-Directional 1310/1550 Single Fiber
Transceiver, 125 Mbps – 1.25 Gbps, SMF, 3.3V
Application Support
To assist in the transceiver design and evaluation process, Glenair offers the following aids:
• Evaluation board & Product Manual, part number 050-329, which facilitates in the testing of the PCB mount
transceiver.
• 3D Step file to support modeling of mechanical fit and routing
• PADS schematic and PCB layout library files that can be exported into customer’s PCB software design program
• Applications Aid Example of PCB layout including details of high speed transmission designs
Customer Manufacturing Processes
This module is mounted with screws and interfaces with a high-speed low cost surface mount electrical connector residing
on the host PC board. The PCB mount transceiver is not designed for aqueous wash, IR reflow, or wave soldering
processes and should be mounted on the host board after host PC board has been through its assembly process.
Proper torque values for mounting screws must be observed. Please contact Glenair for hardware mounting process
recommendations.
©2015 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: 4
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 10 of 14
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]