050_315 Datasheet, PDF (11/15 Pages) Glenair, Inc. – PRODUCT BRIEF

050-315 Product Brief
PCB Mount Transceiver
100 Mbps – 5 Gbps, MMF, 3.3V
Application Support
To assist in the transceiver design and evaluation process, Glenair offers the following aids:
• Evaluation board & Product Manual, part number 050-329, which facilitates in the testing of the PCB Mount
Transceiver.
• 3D Step file to support modeling of mechanical fit and routing
• PADS schematic and PCB layout library files that can be exported into customer’s PCB software design program
• Applications Aid Example of PCB layout including details of high speed transmission designs
Customer Manufacturing Processes
This module is mounted with screws and interfaces with a high-speed low cost surface mount electrical connector residing
on the host PC board. The PCB Mount Transceiver is not designed for aqueous wash, IR reflow, or wave soldering
processes and should be mounted on the host board after host PC board has been through these processes.
Proper torque values for mounting screws must be observed. Please contact Glenair for hardware mounting process
recommendations.
©2014 Glenair, Inc.
GLENAIR, INC.
www.glenair.com
REV: C
∙ 1211 AIR WAY
US Cage Code 06324
∙ GLENDALE, CA 91201-2497 ∙ TEL: [phone]
PAGE 11 of 15
Printed in USA
∙ FAX: [phone]
E-mail: [e-mail]