050_304 Datasheet, PDF (1/8 Pages) Glenair, Inc. – MIL-DTL-38999 type receptacle connector

050-304
D38999 Series III Type Active Receptacle Connector
with Glenair Size 8 Opto-electronic Contacts
MIL-DTL-38999 type receptacle connector with size 8 opto-electronic contacts
050-304 series of Active Opto-electronic sealed panel mount connectors offers
customers the power to convert from electrical to fiber optic signals within a D38999
connector to support high speed fiber optic transmission in harsh environments. The
050-304s incorporates size 8 active contacts in one of three standard configurations
to enable optical Transmitters, optical Receivers or Optical Transceivers. The opto-
electronic performance parameters of the 050-304 are defined by the performance of
the size 8 contacts that are incorporated. For example if one incorporates 4.25Gbps
contacts into the connector then each of the contacts will be 4.25Gbps capable.
The fiber optic signal that is generated within the 050-304 active connectors is
transmitted via ARINC 801 fiber optic connector interface to fiber optic cable system
using a standard D38999 plug connector that has been fitted with adapters to
incorporate ARINC 801 fiber optic contacts. For example a 38999 plug connectors with
size #8 contact cavities, such as 25-08 insert arrangement (per MIL-STD-1560) can be
fitted with Glenair ARINC 801 contact adaptersthat convert this electrical connector
into a fiber optic connector that enables it to properly house and retain contacts at
the required optical interface to achieve very repeatable low loss optical transmission
characteristics
COMPANION ACCESSORY ADAPTER PRODUCTS
These adapters are used to make the PLUG connector that serves as the fiber optic
cable interface.
„„059-0001 adapters convert D38999 size 8 cavities (twinax, coax, quadrax or power cavities) into ARINC 801
LuxCis® fiber optic connectors.
„„059-0002 adapters convert D38999 size 8 cavities (twinax, coax, quadrax or power cavities) into ARINC 801
appendix C, EN4531, ELIO®
APPLICATIONS
„„Support Harsh Environment applications where robust 38999 connectors are required, Airborne, Tactical
and Shipboard
FEATURES
„„Ethernet, Fast Ethernet, Gigabit Ethernet, AFDX, 1x/2x/4x Fiber Channel, DVI, HDMI, SFDP, Serial Rapid I/O
(sRIO) and other high speed communication all over Multimode Fiber
„„Supports up to 34Gbps aggregate transmission bandwidth in a single
connector
„„050-307 Active size 8 contacts to support 2.5mm Fiber Optic contact
systems, 100Mbps to 4.25Gbps per contact
„„MIL-STD-1560 arrangements & Glenair arrangements
„„Arrangements from 1 to 8 size 8 cavities available, contact factory for
custom arrangements
„„Operating temperatures -40 to +85C as supported by the size 8 contacts
„„May be configured in one of 3 standard configurations: Transmitter,
Receiver or Transceiver
„„050-301 contacts to support ARINC 8011.25mm fiber optic interconnect,
100Mbps to 4.25Gbps per contact
„„050-308 Active size 8 contacts to support ARINC 801 1.25mm fiber optic
contact system, 10Mbps to 200Mbps, 1300nm LED
„„059-0002 Adapter available to support converting PLUG D38999 size 8
cavities into ELIO® fiber optic compatible connectors
„„PC tail electrical interfaces or custom micro-coax or flex to PCB
interfaces available
„„Connector rear face contains standoffs to allow direct mechanical
attachment to PCB.
„„059-0001 Adapters available to support converting PLUG D38999 size 8
cavities into ARINC 801 fiber optic compatible connectors
© 2013 Glenair, Inc.
Rev. 01.19.15
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX [phone]
www.glenair.com
29
E-Mail: [e-mail]