GS8000 Datasheet, PDF (6/16 Pages) Gennum Corporation – DVI / HDMI Extender

GS8000 Data Sheet
Table 2-2: DC Electrical Characteristics (Continued)
VDD = 3.0V to 3.3V, T_A = 0°C to 70°C, unless otherwise shown
Parameter
Symbol Conditions
Min
Typ Max Units Test Notes
Level
Digital I/O
Input Voltage, Logic LOW (OE) V_IL
Input Voltage, Logic HIGH (OE) V_IH
Output Voltage, Logic LOW
V_OL
(SCDT)
Output Voltage, Logic HIGH
V_OH
(SCDT)
Differential Signal Inputs
–
–
–
0.70
V
1
–
–
2.0
–
–
V
1
–
Sync Detect Current
–
–
0.4
V
1
–
= +1.25mA
Sync Detect Current
2.4
–
–
V
1
–
= -1.25mA
Common Mode Input Voltage
V_CMIN
–
Range
VDD-0.4
–
VDD
V
6,7
–
Single Ended Standby Input
–
Voltage
Transmitter Disabled
–
VDD
–
V
9
–
or Disconnected
Differential Signal Outputs
Common Mode Output Voltage V_CMOUT
–
Range
Single Ended Standby Output
–
Voltage
50Ω Loads, Output
Muted
Single Ended High Level Output –
Voltage
50Ω Loads
TEST LEVELS
1. Production test at room temperature and nominal supply voltage with
guardbands for supply and temperature ranges.
2. Production test at room temperature and nominal supply voltage with
guardbands for supply and temperature ranges using correlated test.
3. Production test at room temperature and nominal supply voltage.
4. QA sample test.
5. Calculated result based on Level 1, 2, or 3.
6. Not tested. Guaranteed by design simulations.
7. Not tested. Based on characterization of nominal parts.
8. Not tested. Based on existing design/characterization data of similar
product.
9. Indirect test.
VDD-0.5
–
VDD
–
6,7
4
–
VDD
–
V
1
–
–
VDD
–
V
1
–
NOTES
1. All DC and AC electrical parameters within specification.
2. Guaranteed functional.
3. MIL STD 883 ESD protection is applied to all pins on the
device.
4. Compatible with far end termination at 3.3V or 1.8V.
Proprietary and Confidential 25544 - 3 May 2005
6 of 16