GWF410 Datasheet, PDF (2/2 Pages) Gamewell-FCI by Honeywell – Flex 410 FACP, 10 zones, expandable to 20 and 30 zones, 120 VAC

Features (continued)
• Built-in 2-line, 32-character LCD display with easy-to-
read English language readouts
• 3 programmable general purpose relays
• Built-in walk test
• Programmable from keypad, remote annunciator, or
using direct connect port for on-site downloading with
SmartProgram 400 software (Windows^®-based)
• Programmable features to minimize false alarms: smoke
verification, pre-alarm delay, cross-zoning, and
enhanced verification
• Municipal box service and polarity reversal signaling
• Programmable date settings for Daylight Savings Time,
and clock source setting options for 50 Hz, 60 Hz or
internal clock
Options
GWCZM-400 Each GWCZM-400 zone expander pro-
vides the control panel with ten additional
Class B (Style B) zones or five Class A
(Style D) zones. The GWCZM-400 con-
nects to the control panel via the panel
SBUS and is supervised and power limited.
Up to two zone expanders can be used per
panel. Mounts in FACP or into a
GWCAB400-A accessory cabinet.
GWIOM-410 This status display module provides out-
puts and control functions for remote
annunciation of alarm, trouble, and supervi-
sories for each zone. The system can
supervise up to eight GWIOM-410 status
display modules. Mounts in FACP or into a
GWCAB400-A accessory cabinet.
GWRAN-400 The GWRAN-400 remote annunciator can
perform all system control operations. It
also provides trouble and alarm information
and can be used for programming. The
FACP can support up to four GWRAN-400
remote annunciators. Mounts in dual gang
electrical box.
GWCAB400-A This accessory cabinet is used for mount-
ing GWCZM-400 zone expander and/or
GWIOM-410 status display module.
GWPLEX-2GA This door option combines a dead-front
panel with a clear bicarbonate window to
limit access to the control panel. Used for
jurisdictions where single button operation
is required.
Specifications
AC Power
120 VAC, 60Hz, 3 A
Battery
Max. charging circuit:
27.4 VDC@ 0.75A
Max. charger capacity: 33 Ah
(two 18Ah batteries fit inside FACP)
Operating Power 24 VDC operating voltage
Total DC Load 6 A
Initiating Device
Circuits (IDC) (2-wire smoke): 17.5- 27.4 VDC
Alarm current draw (panel): 460 mA
Short circuit current: 95 mA maximum
Standby current draw (panel): 140 mA
Maximum impedance: 50 ohms
Accessory
Power
27.4 VDC, 1 A
Notification
Circuits (NAC)
27.4 VDC, 3 A max/output (6 A total)
Maximum line impedance: 1.5 ohm
Programmable 2.5 A, 24 VDC (inductive), 5 A, 24 VDC
Relays
(resistive), non-power limited
Operating
Range
32° F to 120° F (0° C to 49° C)
Flex 410 Cabinet 26 3/8" x 17 3/16" x 4" (67 x 44 x 10 cm)
(H x W x D)
Accessory
Cabinet
10 3/8" x 10 3/16" x 3" (26 x 26 x 8 cm)
Ordering Information
Part Number
GWF410
GW151321
Options:
GWCZM-400
GWIOM-410
GWRAN-400
GWCAB400-A
GWPLEX-2GA
SP400
Description
Flex 410 FACP, 10 zones, expandable
to 20 and 30 zones, 120 VAC
Flex 410 Installation & Operation
Manual
Zone expander module; adds 10 Class
B or 5 Class A circuits
Input / output relay, supervisory status
module
Remote annunciator for Flex 410
Accessory cabinet for mounting
GWCZM-400 or GWIOM-410
Dead-front door with Plexiglas window
SmartProgram 400 for remote
programming of the Flex 410 using a PC
(available only to authorized distributors
at ESD extranet)
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: [phone] • Fax: [phone]
9021-60294 Rev. A page 2 of 2
www.gamewell-fci.com