GWACC Datasheet, PDF (2/4 Pages) Gamewell-FCI by Honeywell – Audio Command Center Voice Evacuation Control Panel

Controls and Indicators
1. Power On (green).
2. System Trouble (yellow).
3. Message Generator Trouble (yellow).
4. Tone Generator Trouble (yellow).
5. Microphone Trouble (yellow).
6. Record/Playback (green).
7. Zone 1 (green = Active, yellow = Manual Deactivation).
8. Zone 2 (green = Active, yellow = Manual Deactivation).
Other System LEDs: Battery Trouble, Charger Trouble, Ground Fault,
Speaker Circuit Trouble, and Amplifier Supervisory.
Ordering Information
GWACC
25 watt, 25 VRMS, emergency Voice Evacuation Control
Panel (VECP) with integral commercial microphone, digital
message generator, and single-/dual-channel Class A or
Class B speaker circuit.
ACC-AAM25
Optional 25 watt, 25 VRMS Audio Amplifier Module with
single Class A or Class B speaker circuit.
FC-XRM70
Optional 70.7 VRMS Converter Module (one required per
amplifier, consult factory for availability).
FC-RM
Optional Remote Microphone, includes backbox (only one
FC-RM per system).
FC-LPS
Optional Local Playback Speaker.
BAT-1270
Battery, 12 volt, 7.0 AH (two required).
BAT-12120
Battery, 12 volt, 12.0 AH (two required).
BAT-12180
Battery, 12 volt, 18.0 AH (two required).
Page 2 of 4
GWACC CS-2504 09/01/06
Module Features
ACC-AAM25
• 25 watt, 25 VRMS audio amplifier
module.
• Field-programmable for system
expansion to 50 watts (providing dual
25-watt speaker circuits) or as a
backup to the primary 25-watt amplifier
where required.
• Provides single Class A or Class B
speaker circuit.
• Utilizes plug-in-style terminal blocks for
ease of service and maintenance.
• Fully supervised and power-limited.
• Diagnostic LEDs include: yellow
“trouble” LED (cable fault, 70 VRMS
fault, amp fault) and green “amp
functional” LED.
FC-XRM70
• Converts 25 VRMS audio outputs to 70.7
VRMS for retrofit applications.
• Plugs directly on ACC-AAM25
module(s), allowing independent
conversion to 70.7 VRMS.
FC-LPS
• Provides local digital message playback
for user review of field-recorded
custom messages.
Specifications
Electrical specifications
Command input circuits (CMD1
and CMD2):
Trigger input voltage 10.5 — 29 VDC.
NOTE: When programmed for
reverse-polarity activation.
Trouble contact rating: 2.0 A at 30
VDC (resistive), 0.6 A @ 125 VAC
(resistive).
Auxiliary power output: Specific
application power 24 V, 35 mA.
Primary (AC) power: 1.6 A maximum
@ 120 VAC, 50/60 Hz.
Secondary power (battery)
charging circuit:
• Supports lead-acid batteries only.
• Float-charge voltage: 27.6 V.
• Maximum charge current: 800 mA.
• Maximum battery charging capacity:
18 AH.
Cabinet dimensions
Door: 26.174" (66.482 cm) high x
15.780" (40.081 cm) wide x 1.125"
(2.858 cm) deep. Backbox: 26.0"
(66.040 cm) high x 15.5" (39.370 cm)
wide x 4.75" (12.065 cm) deep, depth
includes door.
Standards and Codes
The GWACC complies with the
following standards: NFPA 72 National
Fire Alarm Code; NFPA 101 Life Safety
Code; UL 864 Standard for Control
Units for Fire Alarm Systems; and UL
1711 Standard for Amplifiers for Fire
Alarm Systems.