BCE-95 Datasheet, PDF (2/2 Pages) Gamewell-FCI by Honeywell – Building control element device

Mounting
The BCE-95 is designed to mount in a standard 4.0"
(10.16 cm), 4.688" (11.908 cm) or double gang electrical back-
box. The BCE-95 should be mounted in an easily accessi-
ble location so that the built-in LED may be seen for quick
indication of proper connection and activation.
A programmable remote interface along with a panel
mounted three position switch unit shall be provided for the
control and status reporting of programmed building control
functions. The remote interface shall communicate with the
main control panel via an SLC over a single pair of wires.
The BCE-95 shall provide dry contacts and positive feed-
back of the controlled equipment’s status. On/Off control
and annunciation at the panel shall be provided via a build-
ing control display switch and annunciator unit. The remote
interface shall be Gamewell-FCI BCE-95 with a Gamewell-
FCI BCD display.
Specifications
Standby Current:
Alarm Current:
Operating
Temperature:
Relative Humidity:
Contact Rating:
Input Power:
Housing
Requirements:
0.0008 A
0.0018 A
0° C to 49°C (32°F to 120 °F)
85%, non-condensing
2.0 A at 30 VDC.
0.5 A at 120 VAC.
24 VDC from analog circuit.
4.0" (10.16 cm), 4.688" (11.908 cm),
double gang electrical box.
Ordering Information
Model
BCE-95
70839
BCD
Description
Building control element device. XP95 protocol
compatible.
Trim ring for flush mounting the BCE-95.
Building control display provides annunciation
and ON/OFF/AUTO control of the BCE-95 con-
trol element devices, mounts at the FACP. One
needed for every eight BCEs.
Note: The Building Control Element (BCE-95) is only
compatible with the IdentiFlex 632 & 650 FACPs.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: [phone] • Fax: [phone]
CS-2041 Rev. A page 2 of 2
www.gamewell-fci.com