SP2R1224MC Datasheet, PDF (1/2 Pages) Gamewell-FCI by Honeywell – Wall Speaker/Strobes

SpectrAlert^® Selectable Output
Wall Speaker/Strobes
Description
SP2R1224MC
6943pho1.jpg
SystemSensor SpectrAlert®
Selectable Output Wall
Speaker/Strobes offer en-
hanced features that include the
widest range of candela options
available and the ability to rec-
ognize and self-adjust for either
12- or 24-volt operation, along
with the fidelity sound quality
expected from SpectrAlert®
speaker technology.
Performance. The selectable-
output speaker/strobe offers av-
erage current draws that are not
only lower than conventional
fixed-candela SpectrAlert® prod-
ucts, but also lower than similar
selectable-candela products. In
addition, the broad-frequency re-
sponse range and low harmonic
distortion provided by
SpectrAlert® speaker technology
provides an accurate and intelli-
gible broadcast of evacuation
messages.
Installation. SpectrAlert® se-
lectable-output speaker/strobes offer a variety of in-
stallation-friendly features, such as the ability to mount
to a 4" (10.16 cm) square x 2.125" (5.398 cm) deep
backbox without an extension ring and with no en-
croachment into the box. With field-reversible strobe
placement, the speaker/strobe may be either left- or
right-mounted to avoid obstructions.
6941dia1.wmf
For strobe candela se-
lection, adjust slide
switch located on the
rear of the
Flexibility. SpectrAlert® selectable-output speaker/
strobes offer the broadest range of candela options. In
addition, these selectable-output speaker/strobes can
operate on either 12 or 24 volts, with no setting re-
quired — the device recognizes and self-adjusts to the
correct operating voltage automatically. Speaker volt-
age (25.0 or 70.7) and power tap settings (1/4, 1/2, 1,
or 2 watt) are field-selectable.
Aesthetics. SpectrAlert® selectable-output speaker/strobes incorporate the same
stylish, low-profile design of the conventional SpectrAlert® products, for a consis-
tent and aesthetically pleasing appearance across the entire product line.
SpectrAlert® and Sync•Circuit™ are trademarks of System Sensor.
Features
• Combines the technologies of two
SpectrAlert® products: Selectable
Output Strobes and SP200
Speakers.
• Widest range of candela options:
12 V: 15 and 15/75 candela.
24 V: 15, 15/75, 30, 75, 110
candela.
• Operates on either 12 V or 24 V.
• Easy candela selection with side
viewing window.
• 25.0 and 70.7 volt speaker with
four field-selectable power taps.
• Field-reversible strobe position for
left- or right-mounting.
• Synchronizable with MDL
Sync•Circuit™ module or equip-
ment with SpectrAlert® Sync
Protocol.
• Optional surface-mount backbox
skirt available; BBS-SP2R (red)
and BBS-SP2W (White).
Listings
Listings and approvals below
apply to the basic SpectrAlert^®
Selectrable Output Wall Speaker/
Strobes. In some cases, certain
modules may not be listed by
certain approval agencies, or
listing may be in process. Consult
factory for latest listing status.
• UL Listed: file S4048.
• CSFM approved: file 7320-
1209:186.
• MEA approved: file 127-02-E.
SpectrAlert® Selectable Output Wall Speaker/Strobes CS-2452 10/21/04
Page 1 of 2