MB15F03L Datasheet, PDF (5/24 Pages) Fujitsu Component Limited. – Dual Serial Input PLL Frequency Synthesizer

MB15F03L
s ABSOLUTE MAXIMUM RATINGS
Parameter
Power supply voltage
Input voltage
Output voltage
Output current
Storage temperature
Symbol
VCC
VI
VO
IO
Ido
TSTG
Rating
–0.5 to +4.0
–0.5 to VCC +0.5
–0.5 to VCC +0.5
–10 to +10
–25 to +25
–55 to +125
Unit
Remark
V
V
V
mA
Except Do
mA
Do output
°C
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter
Value
Symbol
Unit
Min
Typ
Max
Note
Power supply voltage
VCC
2.7
3.0
3.6
V
VCCIF=VCCRF
Input voltage
Vi
GND
–
VCC
V
Operating temperature
Ta
–40
–
+85
°C
WARNING: Recommended operating conditions are normal operating ranges for the semiconductor device. All
the device’s electrical characteristics are warranted when operated within these ranges.
Always yse semiconductor devices within the recommended operating conditions. Operation outside
these ranges may adversely affect reliability and could result in device failure.
No warranty is made with repect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representative beforehand.
Handling Precautions
• This device should be transported and stored in anti-static containers.
• This is a static-sensitive device; take proper anti-ESD precautions. Ensure that personnel and equipment are
properly grounded. Cover workerbenches with grounded conductive mats.
• Always turn the power supply off before inserting or removing the device from its socket.
• Protect leads with a conductive sheet when handling or transporting PC boards with devices.
5