MB3827 Datasheet, PDF (33/41 Pages) Fujitsu Component Limited. – 6-ch DC/DC Converter IC With Synchronous Rectification for voltage step-up and step-down

MB3827
s PROCESSING WHEN NOT USING THE XENB1-6 PIN
When VREF control (channel 1 to 6 output control) is not used, the XENB1-6 terminal (pin 4) should be shorted
to GND using the shortest available connection.
When not using the XENB1-6 pin
4 _XNB1−6
s PROCESSING WHEN NOT USING THE CHANNEL 6 INV AMP.
When the channel 6 INV amplifier is not in use, the -IN(A)6 terminal (pin 10), and OUT(A)6 terminal (pin 11)
should be shorted using the shortest available connection.
When not using the channel 6 INV Amp.
10 _−IN(A)6
11 _OUT(A)6
33