MB3887_06 Datasheet, PDF (30/34 Pages) Fujitsu Component Limited. – DC/DC Converter IC for Charging Li-ion battery

MB3887
■ USAGE PRECAUTIONS
• Printed circuit board ground lines should be set up with consideration for common impedance.
• Take appropriate static electricity measures.
• Containers for semiconductor materials should have anti-static protection or be made of conductive material.
• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
• Work platforms, tools, and instruments should be properly grounded.
• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
• Do not apply negative voltages.
• The use of negative voltages below −0.3 V may create parasitic transistors on LSI lines, which can cause
malfunction.
■ ORDERING INFORMATION
Part number
MB3887PFV-❏❏❏
MB3887PFV-❏❏❏E1
Package
24-pin plastic SSOP
(FPT-24P-M03)
24-pin plastic SSOP
(FPT-24P-M03)
Remarks
Conventional version
Lead Free version
■ RoHS Compliance Information of Lead (Pb) Free version
The LSI products of Fujitsu with “E1” are compliant with RoHS Directive , and has observed the standard of
lead, cadmium, mercury, Hexavalent chromium, polybrominated biphenyls (PBB) , and polybrominated diphenyl
ethers (PBDE) .
The product that conforms to this standard is added “E1” at the end of the part number.
■ MARKING FORMAT (Lead Free version)
3887
XXXX
XXX
E1
INDEX
Lead Free version
30