FPD-010R008-0E Datasheet, PDF (3/13 Pages) Fujitsu Component Limited. – 4-Channel Optical Transceiver Module

o-microGiGaCN™
Data Sheet
Revision 4.2
Recommended Operating Conditions
Table 2: Operating Conditions
Parameter
Minimum Typical Maximum Units
Notes
Operating Case Temperature
0
+70
℃
Supply Voltage
: Vcc
3.14
3.3
3.47
V
Power Dissipation
0.9
W
Power Supply Noise
Transmitter Differential
100
Input Voltage
200
1600
mV_P-P 1
mV_P-P
Signaling Rate/Channel
0.5
3.1875
Gbps 2
Serial Data Input Termination
50
Ω
Notes:
1. Transmitter Differential Input Voltage = (Vin+p-p) – (Vin-p-p)
2. Limits assume PRBS2²³-1. Signaling rates lower than indicated may be used with encoding schemes such
as 8B/10B coding.
Electrical Characteristics
Table 3: Transmitter Electrical Characteristics
(Operating Temperature: +20℃ to +80℃, Power Supply: 3.14V to 3.47V)
Parameter
Minimum Typical Maximum Units
Transmitter Differential Input Voltage
100
ODISControl Voltage -HIGH
Vcc-1.3
ODIS Control Voltage -LOW
Notes:
1. All VCSEL transmitters are enabled when this signal is HIGH.
1600
Vcc
0.8
mV_P-P
V
V
Notes
1
1
FUJITSU COMPONENT LIMITED
Page 3 of 13