|
FPD-010R008-0E Datasheet, PDF (1/13 Pages) Fujitsu Component Limited. – 4-Channel Optical Transceiver Module | |||
|
o-microGiGaCNâ¢
Data Sheet
Revision 4.2
o-microGiGaCNâ¢
4-Channel Optical Transceiver Module
Part Number:
Module: FPD-010R008-0E
Patch Cord: FOC-CC****
Description
Newly developed optical transceiver module, FUJITSUâs o-microGiGaCN⢠series supports electric to
optical interface conversion and provides 3.125 Gbps x 4 channel, bi-directional data transfer. The Electrical
interface is FUJITSUâs industry standard high-speed differential copper connector, microGiGaCN⢠that has
been selected by InfiniBandâ¢, 10G Fiber Channel, 10GBASE-CX-4, SAS, and sATA2.
The o-microGiGaCN⢠module makes it possible to extend transmission length up to 300m (2.5Gbps) over
fiber optic cable from Industry Standard 4 lane copper cable with Media Detection Circuitry (connector detect
and power supply circuitry) on the customerâs board/host side. The module provides flexibility, allowing the
user to select interface options with the one low cost copper I/O connector on the board. The module provides
a low cost solution for data center requirements.
Features
Converts 4x microGiGaCN⢠to 4x optical interface
Optical interface 12-channel MPO connector
Up to 100m links with standard 50/125um MMF ribbon cable at 3.125 Gbps, and up to 300m
at 2.5 Gbps
Reliable, Low cost 850nm VCSEL technology
0 to +70 degree C case temperature operating range
Low power: 0.9 Watts Typical with 3.3V power supply supplied through connector
Hot Pluggable electrical interface
IEC Class 1M laser eye safty compliant
FUJITSU COMPONENT LIMITED
Page 1 of 13
|
▷ |