MB3888 Datasheet, PDF (28/30 Pages) Fujitsu Component Limited. – DC/DC Converter IC for Charging Li-ion Battery

MB3888
s USAGE PRECAUTIONS
• Printed circuit board ground lines should be set up with consideration for common impedance.
• Take appropriate static electricity measures.
• Containers for semiconductor materials should have anti-static protection or be made of conductive material.
• After mounting, printed circuit boards should be stored and shipped in conductive bags or containers.
• Work platforms, tools, and instruments should be properly grounded.
• Working personnel should be grounded with resistance of 250 kΩ to 1 MΩ between body and ground.
• Do not apply negative voltages.
• The use of negative voltages below −0.3 V may create parasitic transistors on LSI lines, which can cause
malfunction.
s ORDERING INFORMATION
Part number
MB3888PFV
Package
20-pin plastic SSOP
(FPT-20P-M03)
Remarks
28