MB89173 Datasheet, PDF (17/50 Pages) Fujitsu Component Limited. – 8-bit Proprietary Microcontroller

MB89170/170A/170L Series
s PROGRAMMING TO THE EPROM WITH PIGGYBACK/EVALUATION DEVICE
1. EPROM for Use
MBM27C256A-20TVM
2. Programming Socket Adapter
To program to the EPROM using an EPROM programmer, use the socket adapter (manufacturer: Sun Hayato
Co., Ltd.) listed below.
Package
LCC-32(Square)
Socket adapter part number
ROM-32LC-28DP-S
Inquiry: Sun Hayato Co., Ltd.: TEL [phone]
FAX [phone]
3. Memory Space
Memory space in each mode, such as 32-Kbyte EPROM, is diagrammed below.
Address
Single chip
Corresponding address on the EPROM programmer
0000 H
0080 H
0480 H
8000 H
I/O
RAM
Not available
0000 H
PROM
32 KB
EPROM
32 KB
FFFF H
7FFF H
4. Programming to the EPROM
(1) Set the EPROM programmer for the MBM27C256A.
(2) Load program data into the EPROM programmer at 0000H to 7FFFH.
(3) Program with the EPROM programmer.
17