YG962S6R Datasheet, PDF (3/12 Pages) Fuji Electric – SILICON DIODE

1. SCOPE
This specification provides the ratings and the test requirement for FUJI SILICON DIODE
YG962S6R
2. Application
PFC circuit(current continuous mode)
This diode is a product which optimizes the diode characteristic for the PFC circuit.This product is a
product by which the trr characteristic was valued more than VF though there is a relation of the
trade-off up to VF and Trr.The total loss of the PFC circuit can be suppressed by shortening trr.
3. OUT VIEW, MARKING, MOLDING RESIN, CHARACTERISTICS
(1) Out view is shown
MS5D1436 9/12
(2) Marking is shown
MS5D1436 9/12
It is marked to type name or abbreviated type name, polarity and Lot No.
(3) Molding resin
Epoxy resin
UL:V-0
(4) Characteristics is shown
MS5D1436 10/12~12/12
4. RATINGS
4.1 MAXIMUM RATINGS
ITEM
SYMBOL
CONDITIONS
RATINGS UNITS
Repetitive peak reverse voltage
VRRM
600
V
Non-repetitive peak reverse voltage
Isolating voltage
V_RSM
ViSO Terminals-to-Case,AC.1min
600
V
1500
V
Surge peak forward current
Ips tw 200ns
15
A
Peak forward current
Average output current
Non-repetitive surge current
Ip
Square wave duty =1/2
I0
Tc = 102
IFSM Sine wave, 10ms
10
A
3.5
A
25
A
Operating junction temperature
Tj
Storage temperature
Tstg
150
°C
-40~ 150
°C
4.2 ELECTRICAL CHARACTERISTICS (at Ta=25 unless otherwise specified.)
ITEM
SYMBOL
CONDITIONS
MAXIMUM UNITS
Reverse recovery peak current I_RP IF=5A,-di/dt=200A/ s,VR=380V Tj=100 Typ. 2.0
A
Reverse recovery time
trr ^IF=0.1A,I_R^{=0.2,Irec=0.05A}
Max. 25.0 ns
Forward voltage
VF IF = 10 A
Max. 5.0
V
Reverse current
IR VR = VRRM
Max. 50.0 µ
Thermal resistance
Rth(j-c) Junction to case
Max. 5.0 °C/W
4.3 MECHANICAL CHARACTERISTICS
Mounting torque
Approximate mass
Recommended torque
0.3 0.5 N m
2.0
g
Fuji Electric Co.,Ltd.
ççç MS5D1436 3/12
ď÷ûô÷÷ûô÷ú