EDS11-105E Datasheet, PDF (1/6 Pages) Fuji Electric – FC SERIES SETTER (CONTINUOUS OUTPUT TYPE)

FC SERIES SETTER (CONTINUOUS OUTPUT TYPE)
DATA SHEET
The FC series setter is used for remote setting of a con-
troller or variable constant setting of various types of com-
puting elements.
This instrument uses a solid state indicator and a
pushbutton operation system to provide reliable monitoring
and operating functions.
PNF1
FEATURES
1. High reliability
This instrument is designed with few mechanical parts.
It is mainly composed of electronic parts such as a solid
state indicator which was formerly consisted of mechani-
cal parts.
2. International standards
This instrument is compact in size, conforming to inter-
national standards IEC. It operates on 24V DC power to
deliver 1 to 5V DC signals as recommended by IEC
standards.
100 and 200V AC power are also available for conven-
ience of operation.
3. Front panel operation
Process values and set points can be read accurately with
digital indications on panel front. Various parameter set-
tings and setting operations are also possible from the
front panel of the instrument.
FUNCTIONAL DIAGRAM
Process value
nput (PV)
Linearize
Square-root
extraction
Filter
External set point
nput (CAS or PI)
1 to 5V DC,
pulse width,
or pulse number)
Remote
acknowledege
signal (R-ACK)
Limiter
HL
PV SV
R
L
FAULT
SV
KPV
ALM
Local mode
output (LS)
Remote request
(R-REQ)
Compensated
process
value signal
(KPV)
Set point
output signal
(SV)
FLT output
High alarm
output (H)
Low alarm
output (L)
EDS11-105e
Date Jul. 1, 1994