FT600Q Datasheet, PDF (1/32 Pages) Future Technology Devices International Ltd. – Future Technology Devices International Ltd.

FT600Q-FT601Q IC DatasheetDatasheet
Version 1.02
D oc ument N o.: FT _001118
C learance N o.: FT D I#424
Future Technology
Devices International
Ltd.
FT600Q-FT601Q IC
Datasheet
(USB 3.0 to FIFO Bridge)
The FT600/FT601 is a USB 3.0 to FIFO interface
bridge chip with the following advanced features:
 Supports USB 3.0 Super Speed (5Gbps)/USB
2.0 High Speed (480Mbps)/USB 2.0 Full ^
Speed (12Mbps) transfer.

 Supported
USB
Transfer
Type: 
Control/Bulk/Interrupt

 Up to 8 configurable endpoints (PIPEs).

 Supports 2 parallel slave FIFO bus protocols
245 and FIFO mode, FT601 with 32 bit ^
parallel interface has a data bursting rate up _
to 400MB/s.

 Supports 4 IN channels and 4 OUT channels
on FIFO bus connectivity.

 Built-in 16kB FIFO data buffer RAM.

Supports Remote Wakeup capability.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Internal LDO 1.0V regulator.
Integrated power-on-reset circuit.
User programmable USB descriptors.
Supports Battery Charging spec. BC1.2.
Available as FT600-16bit/FT601-32bit FIFO interface.
Industrial operating temperature range: -40 to 85⁰C.
Available in compact Pb-free QFN-76(32bit) and QFN-
56(16bit) packages (both RoHS compliant).
N either the whole nor any part of the information c ontained in, or the product desc ribed in this manual, may be adapted or reproduced
in any material or electronic form without the prior written cons ent of the copyright holder. This product and its documentat ion are
s upplied on an as-is basis and no warranty as to their s uitability for any partic ular purpose is either made or implied. Future T ec hnology
D evices International L td will not accept any claim for damages hows oever aris ing as a res ult of us e or failure of this produ c t. Y our
s tatutory rights are not affec ted. T his produc t or any variant of it is not intended for use in any medical appliance, device or sys tem in
whic h the failure of the produc t might reasonably be expec ted to res ult in personal injury. T his doc ument provides preliminary
information that may be s ubjec t to c hange without notice. N o freedom to us e patents or other intellec tual property rights is implied by
the public ation of this document. Future Tec hnology Devic es I nternational Ltd, U nit 1 , 2 Seaward P lace, C enturion Business Park,
G las gow G 4 1 1 HH U nited Kingdom. Sc otland Registered Company N umber: SC136640
Copyright © 2016 Future Technology Devices International Limited
1