MC9S08QE8_09 Datasheet, PDF (7/46 Pages) Freescale Semiconductor, Inc – 8-Bit HCS08 Central Processor Unit

Electrical Characteristics
Table 1. Pin Availability by Package Pin-Count (continued)
Pin Number
<-- Lowest Priority --> Highest
32 28 20 16 Port Pin
Alt 1
Alt 2
Alt 3
Alt 4
26 26 20 16 PTA0
KBIP0
TPM1CH0 ADP0⁴
ACMP1+⁴
27 27 — — PTC7
ACMP2–
28 28 — — PTC6
ACMP2+
29 1 — — PTC5
ACMP2O
30 2 — — PTC4
31 3 1 1 PTA5
IRQ
TCLK
RESET
32 4 2 2 PTA4
ACMP1O BKGD
MS
1 _{IIC pins, SCL and SDA can be repositioned using IICPS in SOPT2, default reset locations}
are PTA3 and PTA2.
2 _{TPM2CH2 pin can be repositioned using TPM2CH2PS in SOPT2, default reset location is}
PTA7.
3 _{TPM1CH2 pin can be repositioned using TPM1CH2PS in SOPT2, default reset location is}
PTA6.
4 _{If ADC and ACMP1 are enabled, both modules will have access to the pin.}
3 Electrical Characteristics
3.1 Introduction
This section contains electrical and timing specifications for the MC9S08QE8 series of microcontrollers
available at the time of publication.
3.2 Parameter Classification
The electrical parameters shown in this supplement are guaranteed by various methods. To give the
customer a better understanding the following classification is used and the parameters are tagged
accordingly in the tables where appropriate:
Table 2. Parameter Classifications
P Those parameters are guaranteed during production testing on each individual device.
C
Those parameters are achieved by the design characterization by measuring a statistically relevant
sample size across process variations.
Those parameters are achieved by design characterization on a small sample size from typical devices
T under typical conditions unless otherwise noted. All values shown in the typical column are within this
category.
D Those parameters are derived mainly from simulations.
NOTE
The classification is shown in the column labeled “C” in the parameter
tables where appropriate.
MC9S08QE8 Series Data Sheet, Rev. 7
Freescale Semiconductor
7