80310_12 Datasheet, PDF (7/31 Pages) Freescale Semiconductor, Inc – Alternator Regulator with LIN

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 4. Static Electrical Characteristics
Electrical parameters are tested at die level from 30 to 140 °C. Typical values noted reflect the approximate parameter mean
at T_A = 25 °C under nominal conditions, unless otherwise noted. Parametric guaranteed from T_J = -40 to 150 °C, unless otherwise
noted. Operation is guaranteed by design up to T_J-TSD.
Characteristic
Symbol
Min
Typ
Max
Unit
Bus Voltage Low Level Receive (LIN)⁽¹²⁾
Bus Voltage Low Level Send (LIN)⁽¹²⁾
Bus Voltage High Level Receive (LIN)⁽¹²⁾
Bus Voltage High Level Send (LIN)⁽¹²⁾
Emergency Regulation Voltage⁽¹³⁾
V_BUS-LOW-REC
–
V_BUS-LOW-SEND
–
V_BUS-HIGH-REC
–
V_{BUS-HIGH-SEND}
6.4
V_VCCLB
–
–
0.3 * V_B+A
V
–
1.4
V
–
0.7*V_B+A
V
–
–
V
8.5
9.5
V
Notes
12. Referred to regulator/alternator ground.
13. Operates asynchronous to the regulation cycle in case of a very rapid drop in B+A, usually caused by adding a heavy load without a
battery in the system.
Analog Integrated Circuit Device Data
Freescale Semiconductor
80310
7