KWIKSTIK-K40 Datasheet, PDF (6/19 Pages) Freescale Semiconductor, Inc – KwikStik board assembly

Figure 3. Callouts on back side of the KwikStik
1.3 Getting Started
Follow the Quick Start Guide found printed in the KwikStik box or the interactive DVD for the list of
recommended steps for getting started. Refer to section 5, “Demo Applications” for information on
how to run the pre-programmed demonstrations.
1.4 Reference Documents
The documents listed below should be referenced for more information on the Kinetis family, Tower
System, and MCU Modules. These can be found in the documentation section of
freescale.com/KwikStik or freescale.com/kinetis.
Quick Start Guide
Schematics
Design Package
Kinetis K40 Family Product Brief
Kinetis K40 Family Reference Manual
Kinetis Quick Reference User Guide (QRUG)
2 Hardware Description
The KwikStik development board features the MK40X256VLQ100—an ARM Cortex-M4 based
microcontroller with segment LCD and USB 2.0 full-speed OTG controllers in a 144 LQFP package with a
maximum core operating frequency of 100MHz.
An on-board SEGGER J-Link debug circuit provides a JTAG and SWD interface and a power supply input
through a single USB micro-B connector. Figure 4 shows a block diagram of the KwikStik. The following
sections describe the hardware in more detail.
KWIKSTIKK40UM
KwikStik-K40 User's Manual
Page 6 of 19