KWIKSTIK-K40 Datasheet, PDF (19/19 Pages) Freescale Semiconductor, Inc – KwikStik board assembly

5.2 Remote Control
The remote control application uses the infrared transmitter to send SIRC protocol commands that can
control most Sony televisions. Commands for Power (E2), Channel Up (E4), and Channel Down (E6) are
pre-stored and can be transmitted by pressing the corresponding electrode.
Figure 16. Remote Control demo application electrode layout
5.3 USB Joystick
The KwikStik can be used as a USB joystick device when running this application. When this application
is selected the K40X256 will be enumerated as “MQX Joystick” on the PC. Use the touch-sensing
electrodes to send button commands to the PC.
Figure 17. USB Joystick demo application electrode layout
To test the Joystick demo application, use the Joystick properties dialog on a PC running Windows.
Refer to Figure 18 for step by step procedure to access the test application in Windows 7. For other
operating systems, refer to the corresponding joystick testing application.
Figure 18. Procedure to access Joystick properties dialog in Windows 7
KWIKSTIKK40UM
KwikStik-K40 User's Manual
Page 19 of 19