English
Language : 

56F8036 Datasheet, PDF (31/164 Pages) Freescale Semiconductor, Inc – 16-bit Digital Signal Controllers
56F8036 Signal Pins
Table 2-3 56F8036 Signal and Package Information for the 48-Pin LQFP (Continued)
Signal LQFP
Name Pin No.
Type
State During
Reset
Signal Description
GPIOC12
7
(ANB4)
GPIOD4
41
(EXTAL)
GPIOD5
40
(XTAL)
(CLKIN)
TDI
45
(GPIOD0)
TDO
48
(GPIOD1)
Input/
Output
Analog
Input
Input/
Output
Analog
Input
Input/
Output
Analog
Input/
Output
Input
Input
Input/
Output
Output
Input/
Output
Input
Input
Input
Port C GPIO — This GPIO pin can be individually programmed as
an input or output pin.
ANB4 — Analog input to ADC B, Channel 4.
After reset, the default state is GPIOC12.
Port D GPIO — This GPIO pin can be individually programmed as
an input or output pin.
External Crystal Oscillator Input — This input can be connected to
an 8MHz external crystal. Tie this pin low if XTAL is being driven by
an external clock source.
After reset, the default state is GPIOD4.
Port D GPIO — This GPIO pin can be individually programmed as
an input or output pin.
External Crystal Oscillator Output — This output connects the
internal crystal oscillator output to an external crystal.
External Clock Input — This pin serves as an external clock input.
After reset, the default state is GPIOD5.
Input,
internal
pull-up
enabled
Test Data Input — This input pin provides a serial input data stream
to the JTAG/EOnCE port. It is sampled on the rising edge of TCK
and has an on-chip pull-up resistor.
Port D GPIO — This GPIO pin can be individually programmed as
an input or output pin.
After reset, the default state is TDI.
Output
tri-stated,
internal
pull-up
enabled
Test Data Output — This tri-stateable output pin provides a serial
output data stream from the JTAG/EOnCE port. It is driven in the
shift-IR and shift-DR controller states, and changes on the falling
edge of TCK.
Port D GPIO — This GPIO pin can be individually programmed as
an input or output pin.
After reset, the default state is TDO.
Return to Table 2-2
56F8036 Data Sheet, Rev. 3
Freescale Semiconductor
31
Preliminary