MC34652 Datasheet, PDF (23/25 Pages) Freescale Semiconductor, Inc – 2.0 A Negative Voltage Hot Swap Controller with Enhanced Programmability

PACKAGE DIMENSIONS
PACKAGE DIMENSIONS
Important For the most current revision of the package, visit www.freescale.com and perform a keyword search on the “98A”
drawing number below:
PIN'S
NUMBER
1
PIN 1 INDEX
0.25 M B
6.2
A
8X _5.8
16
4
10.0
9.8
A
A
1.75
1.35
8
0.50
0.25
X45˚
9
4.0
3.8
B
5
0.25
0.10
16X
0.49
0.35
6
0.25 ^M T A B
14X
1.27
T
SEATING
PLANE
16X
0.1 T
0.25
0.19
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
3. DATUMS A AND B TO BE DETERMINED AT THE
PLANE WHERE THE BOTTOM OF THE LEADS
EXIT THE PLASTIC BODY.
4. THIS DIMENSION DOES NOT INCLUDE MOLD
FLASH, PROTRUSION OR GATE BURRS. MOLD
FLASH, PROTRUSION OR GATE BURRS SHALL
NOT EXCEED 0.15MM PER SIDE. THIS
DIMENSION IS DETERMINED AT THE PLANE
WHERE THE BOTTOM OF THE LEADS EXIT
THE PLASTIC BODY.
5. THIS DIMENSION DOES NOT INCLUDE
INTER-LEAD FLASH OR PROTRUSIONS.
INTER-LEAD FLASH AND PROTRUSIONS
SHALL NOT EXCEED 0.25MM PER SIDE. THIS
DIMENSION IS DETERMINED AT THE PLANE
WHERE THE BOTTOM OF THE LEADS EXIT
THE PLASTIC BODY.
6. THIS DIMENSION DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL NOT CAUSE
THE LEAD WIDTH TO EXCEED 0.62MM.
1.25
0.40
7˚
0˚
SECTION A-A
EF SUFFIX (Pb-Free)
16-TERMINAL SOIC NARROW BODY
PLASTIC PACKAGE
98ASB42566B
ISSUE K
Analog Integrated Circuit Device Data
Freescale Semiconductor
34652
23