English
Language : 

33730_10 Datasheet, PDF (14/26 Pages) Freescale Semiconductor, Inc – Switch Mode Power Supply with Multiple Linear Regulators
FUNCTIONAL DESCRIPTION
FUNCTIONAL INTERNAL BLOCK DESCRIPTION
RESET CIRCUITRY
There are four open drain reset lines that indicate the
status of the four voltage outputs; VDDH, VDDL, VDD3, and
VKAM. They are labeled: RSTH, RSTL, RST3, and
RSTKAM.
REGON INPUT
This input is OR’d with VIGN. However, it is a 5.0 volt logic
input, as opposed to VIGN, which is a VBAT level input. This
input is controlled by an MCU I/O pin, to hold power up when
the ignition switch is turned off, so housekeeping functions
can be performed before power is shut off, by lowering the
REGON line. IF REGON is not needed, it should be tied to
GND.
33730
14
Analog Integrated Circuit Device Data
Freescale Semiconductor