|
K30P100M100SF2V2 Datasheet, PDF (13/67 Pages) Freescale Semiconductor, Inc – K30 Sub-Family | |||
|
◁ |
5.2.3 Voltage and current operating behaviors
Table 4. Voltage and current operating behaviors
Symbol
VOH
Description
Output high voltage â high drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOH = -9mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOH = -3mA
Min.
VDD â 0.5
VDD â 0.5
Max.
â
â
Unit
V
V
Output high voltage â low drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOH = -2mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOH = -0.6mA
VDD â 0.5
â
V
VDD â 0.5
â
V
IOHT
Output high current total for all ports
VOL
Output low voltage â high drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOL = 9mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOL = 3mA
â
100
mA
â
0.5
V
â
0.5
V
Output low voltage â low drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOL = 2mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOL = 0.6mA
â
0.5
V
â
0.5
V
IOLT
Output low current total for all ports
IIN
Input leakage current (per pin) for full temperature
range
IIN
Input leakage current (per pin) at 25°C
IOZ
Hi-Z (off-state) leakage current (per pin)
RPU
Internal pullup resistors
RPD
Internal pulldown resistors
â
100
mA
â
1
μA
â
0.025
μA
â
1
μA
20
50
kΩ
20
50
kΩ
1. Measured at VDD=3.6V
2. Measured at VDD supply voltage = VDD min and Vinput = VSS
3. Measured at VDD supply voltage = VDD min and Vinput = VDD
General
Notes
1
1
2
3
5.2.4 Power mode transition operating behaviors
All specifications except tPOR, and VLLSxâRUN recovery times in the following table
assume this clock configuration:
⢠CPU and system clocks = 100 MHz
⢠Bus clock = 50 MHz
⢠Flash clock = 25 MHz
K30 Sub-Family Data Sheet, Rev. 1, 6/2012.
Freescale Semiconductor, Inc.
Preliminary
13
General Business Information
|
▷ |