|
K10P48M50SF0 Datasheet, PDF (13/59 Pages) Freescale Semiconductor, Inc – K10 Sub-Family | |||
|
◁ |
5.2.3 Voltage and current operating behaviors
Table 4. Voltage and current operating behaviors
Symbol
VOH
Description
Output high voltage â high drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOH = - 9 mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOH = -3 mA
Min.
VDD â 0.5
VDD â 0.5
Max.
â
â
Unit
V
V
Output high voltage â low drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOH = -2 mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOH = -0.6 mA
VDD â 0.5
â
V
VDD â 0.5
â
V
IOHT
Output high current total for all ports
VOL
Output low voltage â high drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOL = 9 mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOL = 3 mA
â
100
mA
â
0.5
V
â
0.5
V
Output low voltage â low drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOL = 2 mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOL = 0.6 mA
â
0.5
V
â
0.5
V
IOLT
Output low current total for all ports
IIN
Input leakage current (per pin)
⢠@ full temperature range
⢠@ 25 °C
â
100
mA
â
1.0
μA
â
0.1
μA
IOZ
Hi-Z (off-state) leakage current (per pin)
â
1
μA
IOZ
Total Hi-Z (off-state) leakage current (all input pins)
â
4
μA
RPU
Internal pullup resistors
22
50
kΩ
RPD
Internal pulldown resistors
22
50
kΩ
1. Tested by ganged leakage method
2. Measured at Vinput = VSS
3. Measured at Vinput = VDD
General
Notes
1
2
3
5.2.4 Power mode transition operating behaviors
All specifications except tPOR, and VLLSxâRUN recovery times in the following table
assume this clock configuration:
⢠CPU and system clocks = 50 MHz
⢠Bus clock = 50 MHz
⢠Flash clock = 25 MHz
K10 Sub-Family Data Sheet, Rev. 4 5/2012.
Freescale Semiconductor, Inc.
13
|
▷ |