56F8367_09 Datasheet, PDF (125/182 Pages) Freescale Semiconductor, Inc – 16-bit Digital Signal Controllers

Register Descriptions
6.5.9.9 Quad Timer B Enable (TMRB)—Bit 7
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
6.5.9.10 Quad Timer A Enable (TMRA)—Bit 6
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
6.5.9.11 Serial Communications Interface 1 Enable (SCI1)—Bit 5
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
6.5.9.12 Serial Communications Interface 0 Enable (SCI0)—Bit 4
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
6.5.9.13 Serial Peripheral Interface 1 Enable (SPI1)—Bit 3
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
6.5.9.14 Serial Peripheral Interface 0 Enable (SPI0)—Bit 2
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
6.5.9.15 Pulse Width Modulator B Enable (PWMB)—1
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
6.5.9.16 Pulse Width Modulator A Enable (PWMA)—0
Each bit controls clocks to the indicated peripheral.
• 1 = Clocks are enabled
• 0 = The clock is not provided to the peripheral (the peripheral is disabled)
56F8367 Technical Data, Rev. 9
Freescale Semiconductor
125
Preliminary