56F8367_09 Datasheet, PDF (123/182 Pages) Freescale Semiconductor, Inc – 16-bit Digital Signal Controllers

Register Descriptions
6.5.8.2 GPIOD1 (D1)—Bit 5
This bit selects the alternate function for GPIOD1.
• 0 = CS3
• 1 = CAN2_RX
6.5.8.3 GPIOD0 (D0)—Bit 4
• 0 = CS2
• 1 = CAN2_TX
6.5.8.4 GPIOC3 (C3)—Bit 3
This bit selects the alternate function for GPIOC3.
• 0 = HOME1/TB3 (default - see “Switch Matrix Mode” bits of the Quad Decoder DECCR register in the
56F8300 Peripheral User Manual)
• 1 = SS1
6.5.8.5 GPIOC2 (C2)—Bit 2
This bit selects the alternate function for GPIOC2.
• 0 = INDEX1/TB2 (default)
• 1 = MISO1
6.5.8.6 GPIOC1 (C1)—Bit 1
This bit selects the alternate function for GPIOC1.
• 0 = PHASEB1/TB1 (default)
• 1 = MOSI1
6.5.8.7 GPIOC0 (C0)—Bit 0
This bit selects the alternate function for GPIOC0.
• 0 = PHASEA1/TB0 (default)
• 1 = SCLK1
6.5.9 Peripheral Clock Enable Register (SIM_PCE)
The Peripheral Clock Enable register is used enable or disable clocks to the peripherals as a power savings
feature. The clocks can be individually controlled for each peripheral on the chip.
Base + $C
Read
Write
RESET
15 14 13 12 11 10 9
8
7
6
54
3
2
1
0
EMI ADCB ADCA CAN DEC1 DEC0 TMRD TMRC TMRB TMRA SCI 1 SCI 0 SPI 1 SPI 0 PWMB PWMA
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Figure 6-13 Peripheral Clock Enable Register (SIM_PCE)
56F8367 Technical Data, Rev. 9
Freescale Semiconductor
123
Preliminary