MW7IC2220NR1 Datasheet, PDF (1/27 Pages) Freescale Semiconductor, Inc – RF LDMOS Wideband Integrated Power Amplifiers

Freescale Semiconductor
Technical Data
RF LDMOS Wideband Integrated
Power Amplifiers
The MW7IC2220N wideband integrated circuit is designed with on - chip
matching that makes it usable from 2000 to 2200 MHz. This multi - stage
structure is rated for 24 to 32 Volt operation and covers all typical cellular base
station modulation formats including TD - SCDMA.
• Typical Single - Carrier W - CDMA Performance: V_DD = 28 Volts, I_DQ1 = 80 mA,
I_DQ2 = 300 mA, P_out = 2 Watts Avg., Full Frequency Band, Channel
Bandwidth = 3.84 MHz, Input Signal PAR = 7.5 dB @ 0.01% Probability
on CCDF.
Power Gain — 31 dB
Power Added Efficiency — 13%
ACPR @ 5 MHz Offset — - 50 dBc in 3.84 MHz Bandwidth
• Capable of Handling 5:1 VSWR, @ 28 Vdc, 2140 MHz, 20 Watts CW
Output Power
• Typical P_out @ 1 dB Compression Point ' 20 Watts CW
• Stable into a 5:1 VSWR. All Spurs Below - 60 dBc @ 100 mW to 5 Watts
CW P_out.
Features
• Characterized with Series Equivalent Large - Signal Impedance Parameters
and Common Source Scattering S - Parameters
• On - Chip Matching (50 Ohm Input, DC Blocked, >3 Ohm Output)
• Integrated Quiescent Current Temperature Compensation with Enable/
Disable Function ⁽¹⁾
• Integrated ESD Protection
• 225°C Capable Plastic Package
• RoHS Compliant
• In Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel.
Document Number: MW7IC2220N
Rev. 0, 9/2008
MW7IC2220NR1
MW7IC2220GNR1
MW7IC2220NBR1
2110 - 2170 MHz, 2 W Avg., 28 V
SINGLE W - CDMA
RF LDMOS WIDEBAND
INTEGRATED POWER AMPLIFIERS
CASE 1886 - 01
TO - 270 WB - 16
PLASTIC
MW7IC2220NR1
CASE 1887 - 01
TO - 270 WB - 16 GULL
PLASTIC
MW7IC2220GNR1
CASE 1329 - 09
TO - 272 WB - 16
PLASTIC
MW7IC2220NBR1
GND ¹
V_DS1
2
NC ³
16 _GND
15
NC
V_DS1
NC ⁴
NC 5
RF_in
V_GS1
V_GS2
V_DS1
Quiescent Current
Temperature Compensation ⁽¹⁾
RF_out/V_DS2
RF_in
6
14
NC ⁷
V_GS1
8
V_GS2
9
V_DS1
10
13
GND ¹¹
12
(Top View)
RF_out/V_DS2
NC
GND
Note: Exposed backside of the package is
the source terminal for the transistors.
Figure 1. Functional Block Diagram
Figure 2. Pin Connections
1. Refer to AN1977, Quiescent Current Thermal Tracking Circuit in the RF Integrated Circuit Family and to AN1987, Quiescent Current Control
for the RF Integrated Circuit Device Family. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1977 or AN1987.
© Freescale Semiconductor, Inc., 2008. All rights reserved.
RF Device Data
Freescale Semiconductor
MW7IC2220NR1 MW7IC2220GNR1 MW7IC2220NBR1
1