33990_06 Datasheet, PDF (1/16 Pages) Freescale Semiconductor, Inc – Enhanced Class B Serial Transceiver

Freescale Semiconductor
Advance Information
Document Number: MC33990
Rev 3.0, 11/2006
Enhanced Class B Serial
Transceiver
33990
The 33990 is a serial transceiver designed to provide bi-directional
half-duplex communication meeting the automotive SAE Standard J-
1850 Class B Data Communication Network Interface specification. It
is designed to interface directly to on-board vehicle microcontrollers
and serves to transmit and receive data on a single-wire bus at data
rates of 10.4 kbps using Variable Pulse Width Modulation (VPWM).
The 33990 operates directly from a vehicle's 12 V battery system and
functions in a true logic fashion as an I/O interface between the
microcontroller's 5.0 V CMOS logic level swings and the required 0 V
to 7.0 V waveshaped signal swings of the bus. The bus output driver
is short circuit current limited.
Features
• Designed for SAE J-1850 Class B Data Rates
• Full Operational Bus Dynamics Over a Supply Voltage of 9.0 V
to 16 V
• Ambient Operating Temperature of -40°C to 125°C
• Interfaces Directly to Standard 5.0 V CMOS Microcontroller
• BUS Pin Protected Against Shorts to Battery and Ground
• Thermal Shutdown with Hysteresis
• Voltage Waveshaping of Bus Output Driver
• Internally Reverse Battery Protected
• 40 V Max V_BAT Capability
• Pb-Free Packaging Designated by Suffix Code EF
J-1850 SERIAL TRANSCEIVER
D SUFFIX
EF SUFFIX (PB-FREE)
98ASB42564B
8-PIN SOICN
ORDERING INFORMATION
Device
Temperature
Range (T_A)
Package
MC33990D/DR2
MCZ33990EF/R2
-40°C to 125°C
8 SOICNN
V_BAT
33990
+VBAT
BUS
Primary
Node
MCU
SLEEP
TX
LOAD
RX
4X/LOOP
GND
Secondary
Nodes
Figure 1. 33990 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2006. All rights reserved.