ESD9FN24 Datasheet, PDF (2/7 Pages) Formosa MS – Chip Transient Voltage Suppressor For ESD Protection

Chip Transient Voltage Suppressor For ESD Protection
ESD9FN24
86W Surface Mount TVS Uni-directional
For ESD Protection- 24V
Formosa MS
Features
• Small body outline dimensions:
0.039” X 0.024” (1.0mm X 0.60mm)
• Provide transient protection:
IEC 61000-4-2 (ESD) Level 4
IEC 61000-4-4 (EFT) 80A (5/50ns)
IEC 61000-4-5 (Surge) (8/20us)
• Low leakage current
• Suffix "-H" indicates Halogen-free parts, ex. ΕSD9FΝ24-H.
Mechanical data
• Epoxy: UL94-V0 rated flame retardant
• Case: Molded plastic,0402
• Terminals: Golden Plated terminals,
solderable per MIL-STD-750,Method 2026
• Marking Code: X
• Weight: Approximated 0.001gram
Schematic & Pin Configuration
Package outline
0402
0.041(1.05)
0.037(0.95)
0.026(0.65)
0.022(0.55)
0.0138(0.35) Typ.
0.012(0.30)Typ.
0.022(0.55)
0.018(0.45)
0.0177(0.45) Typ.
Dimensions in inches and (millimeters)
Maximum ratings (at T_A=25^oC unless otherwise noted)
PARAMETER
CONDITIONS
Peak pulse power
tp = 8/20us
Peak pulse current
tp = 8/20us (IEC 61000-4-5)
ESD per IEC 61000-4-2
Air discharge
Contact discharge
Operating junction temperature range
Storage temperature range
Symbol
PPP
IPP
MIN.
ESD
TJ
-55
T_STG
-55
TYP.
MAX. UNIT
86
W
2
A
±16
kV
±8
+125 ^OC
+150 ^OC
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only.
Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to
stresses above the Recommended Operating Conditions may affect device reliability.
Electrical characteristics (at T_A=25^oC unless otherwise noted, V_F = 1.8V Max. @I_F = 10mA)
Part No.
V_RWM(V)
Max.
I_R(uA)
@V_RWM
Max.
I_T(mA)
V ( _BR V)
@I_T
Min.
V_C(V)
@I_PP=2A
Max.
CJ(pF)
@V_R=0V,f=1MHz
Max.
ESD9FN24
24.0
1.0
1.0
25.5
43.0
35.0
Over voltage available upon request.
1. V_BR is measured with a pulse test current I_T at anambient temperature of 25^OC.
2.Surge current waveform per Figure 1.
http://www.formosams.com/
TEL:[phone]
FAX:[phone]
Page 2
Document ID
DS-121813
Issued Date
2015/12/11
Revised Date
-
Revision
A
Page.
7