HVS6003-002 Datasheet, PDF (2/8 Pages) Finisar Corporation. – PHOTOREFLECTIVE SENSOR LEADFRAME PACKAGE

HVS6003-002
PHOTOREFLECTIVE SENSOR
ABSOLUTE MAXIMUM
RATINGS
Parameter
Storage Temperature
Case Operating Temperature
Lead Solder Temperature
Laser peak forward current with pulse
width less than 1μs
Laser continuous average current
Laser reverse voltage
ESD Exposure (Human Body Model)
Collector-Emitter Voltage
Emitter-Collector Voltage
Power Dissipation
Rating
-40 to +85°C
-40 to +85°C
260°C, 10 sec.
18mA
15mA
5V
200V
30V
5V
100mW
*-20ºC operation under assessment
1 _{Heel and wrist straps must be used on a properly grounded}
workstation
Notice
Stresses greater than those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other
conditions above those indicated in the operations section for
extended periods of time may affect reliability.
Notice
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage
and/or degradation to equipment, take normal ESD precautions when
handling this product