HVS6003-001 Datasheet, PDF (2/6 Pages) Finisar Corporation. – PHOTOREFLECTIVE SENSOR DOME LENS PACKAGE

HVS6003-001
PHOTOREFLECTIVE SENSOR
ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Storage Temperature
-40 to +85°C
Case Operating Temperature
0 to +85°C
Lead Solder Temperature
260°C, 10 sec.
Reverse Power Supply Voltage
5V
Peak continuous forward current
15mA
Laser peak forward current with pulse
width less than 1μs
ESD Exposure (Human Body Model)
18mA
200V¹
Collector-Emitter Voltage
30V
Emitter-Collector Voltage
5V
Power Dissipation
100mW
1 _{Heel and wrist straps must be used on a properly grounded}
workstation
Notice
Stresses greater than those listed under “Absolute Maximum Ratings”
may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other
conditions above those indicated in the operations section for
extended periods of time may affect reliability.
Notice
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage
and/or degradation to equipment, take normal ESD precautions when
handling this product