LP1500SOT223 Datasheet, PDF (2/2 Pages) Filtronic Compound Semiconductors – Low Noise, High Linearity Packaged PHEMT

Filtronic
Solid State
LP1500SOT223
Low Noise, High Linearity Packaged PHEMT
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED CONTINUOUS
(25°C)
OPERATING LIMITS
SYMBOL
PARAMETER
RATING¹
SYMBOL
PARAMETER
RATING²
V_DS Drain-Source Voltage
4V
V_DS Drain-Source Voltage
3.5V
V_GS Gate-Source Voltage
-3V
V_GS Gate-Source Voltage
-1V
I_DS
Drain-Source Current
I_DSS
I_DS
Drain-Source Current 0.5 x I_DSS
I_G
Gate Current
50 mA
I_G
Gate Current
15 mA
P_IN
RF Input Power
350 mW
P_IN
RF Input Power
250 mW
T_CH Channel Temperature 175°C
T_CH Channel Temperature 150°C
T_STG Storage Temperature -65/175°C
T_STG Storage Temperature -20/50°C
P_T
Power Dissipation
1.7W^3,4
P_T
Power Dissipation
1.4 W^3,4
G_XdB Gain Compression
8 dB
NOTES:
1. Operating conditions that exceed the Absolute Maximum Ratings could result in permanent damage to the device.
2. Recommended Continuous Operating Limits should be observed for reliable device operation.
3. Power Dissipation defined as: P_T ≡ (P_DC + P_IN) - P_OUT, where: P_DC = DC bias power, P_OUT = RF output power, and
P_IN = RF input power. Provide for adequate heatsinking at the large source lead.
4. Power Dissipation to be de-rated as follows above 25°C:
Absolute Maximum:
P_T = 1.7W - (10mW/°C) x T_HS
Recommended Continuous Operating: P_T = 1.4W - (10mW/°C) x T_HS
where T_HS = heatsink or ambient temperature.
5. Specifications subject to change without notice.
HANDLING PRECAUTIONS:
Care should be exercised during handling to avoid damage to the devices. Proper Electrostatic Discharge (ESD)
precautions should be observed at all stages of storage, handling, assembly, and testing. These devices should be
treated as Class 1A (0-500V), and further information on ESD control measures can be found in MIL-STD-1686 and MIL-
HDBK-263.
APPLICATIONS NOTES AND DESIGN DATA:
Applications Notes are available from your local FSS Sales Representative, or directly from the factory. Complete design
data, including S-parameters, Noise data, and Large-Signal models, is available on 3.5” diskette, or may be down-loaded
from our Web Page.
PACKAGE OUTLINE:
0 .2 6 4
0 .1 2 0
0 .1 4 6
0 .0 9 0
Phone: [phone]
0 .2 8 6
0 .0 5 1
0 .0 1 2
0 .0 7 1
0 .0 3 0
(D IM EN SIO N S IN IN C H ES )
DSS-026 WF
Internet: http://www.filtronicsolidstate.com
Fax: [phone]