 English |
|
|
|
|
|
|
|
| FAN7389_13 Datasheet, PDF (5/17 Pages) Fairchild Semiconductor – 3-Phase Half-Bridge Gate-Drive IC | |||
| |||
| ◁ |
Electrical Characteristics
VBIAS (VDD, VBS1,2,3) = 15.0 V and TA = 25°C unless otherwise specified. The VIN and IIN parameters are referenced to
COM and are applicable to all six channels. The VO and IO parameters are referenced to VS1,2,3 and COM and are
applicable to the respective output leads: HO1,2,3 and LO1,2,3. The VDDUV parameters are referenced to COM. The
VBSUV parameters are referenced to VS1,2,3.
Symbol
Parameter
Conditions
Min. Typ. Max. Unit
Low-Side Power Supply Section
IQDD Quiescent VDD Supply Current
IPDD Operating VDD Supply Current
VDDUV+
VDD Supply Under-Voltage Positive-Going
Threshold
VDDUV-
VDD Supply Under-Voltage Negative-Going
Threshold
VDDHYS
VDD Supply Under-Voltage Lockout
Hysteresis
VLIN1,2,3=0 V or 5 V, EN=0 V
fLIN1,2,3=20 kHz, rms Value
VDD=Sweep
VDD=Sweep
VDD=Sweep
200
μA
400
μA
7.5 8.5 9.3 V
7.0 8.0 8.7 V
0.5
V
Bootstrapped Power Supply Section
VBSUV+
VBS Supply Under-Voltage Positive-Going
Threshold
VBS1,2,3=Sweep
7.5 8.5 9.3 V
VBSUV-
VBS Supply Under-Voltage Negative-Going
Threshold
VBS1,2,3=Sweep
7.0 8.0 8.7 V
VBSHYS
VBS Supply Under-Voltage Lockout
Hysteresis
VBS1,2,3=Sweep
0.5
V
ILK Offset Supply Leakage Current
VB1,2,3=VS1,2,3=600 V
10 μA
IQBS Quiescent VBS Supply Current
VHIN1,2,3=0V or 5 V, EN=0V
10 50 80 μA
IPBS Operating VBS Supply Current
fHIN1,2,3=20 kHz, rms Value
200 420 480 μA
Gate Driver Output Section
VOH High-Level Output voltage, VBIAS-VO
IO=0 mA (No Load)
100 mV
VOL Low-Level Output voltage, VO
IO=0 mA (No Load)
100 mV
IO+ Output HIGH Short-Circuit Pulse Current(5) VO=0 V, VIN=5 V with PWâ¤10 µs 250 350
mA
IO-
Output LOW Short-Circuit Pulsed Current(5)
VO=15 V, VIN=0 V with
PWâ¤10 µs
500 650
mA
VS
Allowable Negative VS Pin Voltage for HIN
Signal Propagation to HO
-9.8 -7.0 V
Logic Input Section
VIH Logic "1" Input Voltage HIN1,2,3, LIN1,2,3
VIL Logic "0" Input Voltage HIN1,2,3, LIN1,2,3
IIN+ Logic Input Bias Current (HO=LO=HIGH)
IIN- Logic Input Bias Current (HO=LO=LOW)
RIN Logic Input Pull-Down Resistance
Enable Control Section (EN)
VEN+
VEN-
Enable Positive-Going Threshold Voltage
Enable Negative-Going Threshold Voltage
IEN+ Logic Enable â1â Input Bias Current
IEN- Logic Enable â0â Input Bias Current
VIN=5 V
VIN=0 V
VEN=5 V (Pull-Down=150KΩ)
VEN=0 V
2.5
V
0.8 V
100
μA
2 μA
50
KΩ
2.5
V
0.8 V
33
μA
2 μA
Continued on the following pageâ¦
© 2010 Fairchild Semiconductor Corporation
FAN7389 ⢠Rev. 1.0.3
5
www.fairchildsemi.com
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese